How To Confirm Fit of Kodiak Disc Brake Kit - 8" Rotor/Hub - 2,000 Lb Axles

Published 12/13/2022

Products Featured in This Question

Kodiak Disc Brake Kit - 8" Rotor/Hub - 5 on 4-1/2 - Dacromet - 2,000 lbs

(7)

$416.07

Bearing Kit for Trailer Brakes with 8" Hub/Rotor - 2,000 lbs

(2)

$20.97

Bearing Kit for Trailer Brakes with 8" Hub/Rotor - E-Z Lube - 2,000 lbs

(7)

$21.34

Question:

Will this fit a 10x7inch snowmobile trailer wheel? The dimensions in another question are off from mine due to a solid rotor.

asked by: Ttd

Expert Reply:

The Kodiak Disc Brake Kit - 8" Rotor/Hub part # K2HR2D is designed for a trailer with 2,000 lb axles which uses L44649 bearings. In order to confirm fit you'll need to identify the axle capacity which is usually listed on the axle tag in the center of the beam. If it's not listed here then you'll will need to pull apart the bearings and or measure the spindle. I have attached a help article below to assist with this. If you have a different axle capacity or bearings then these won't work and you'll need to choose another set from the list below or just let me know what you have and I can make a recommendation.

Please note, the Kodiak Disc Brake Kit - 8" Rotor/Hub doesn't actually come with bearings and seal etc. I recommend replacing these with the new hub/rotor using the Bearing Kit for Trailer Brakes with 8" Hub/Rotor part # DBRKHW2 or part # DBRKHW2SS for e-z lube.

expert reply by: Conner L