Determining Load Rate For Spindle # TRU74FR
Updated 12/05/2022 | Published 12/04/2022
Products Featured in This Question
Question:
Are the load rates per spindle or per pair of spindles?
asked by: Joseph R
Expert Reply:
The load rates for the spindles are per pair. For example The #84 E-Z Lube Spindle w/ Brake Flange # TRU74FR has a spindle capacity of 1,750 pounds but as a pair has a 3,500 pound weight capacity. This spindle has a standard Inner Bearing # L68149 (1.378 inches) and an Outer Bearing # L44649 (1.063 inches).
If you could reach back out to me with what your axle capacity is or what your inner and outer bearing numbers are I will be able to help you find the correct spindle.
Product Page this Question was Asked From
Fulton Single Axle Trailer Fender with Top and Side Steps - Silver Plastic - 12" Wheels - Qty 1
- Trailer Fenders
- Top and Side Step
- 12 Inch Wheels
- 7-1/2 Inch Wide
- 36 Inch Long
- Plastic
- Bolt-On
- For Single-Axle Trailers
- Silver
- Fulton
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Replacement Fenders for a 2003 Triton LT WC-II Jet Ski Trailer
- Q&A: Single Axle Trailer Fender With Brackets 25-1/2" Apart
- Q&A: Mounting Brackets for Fulton Trailer Fenders # F008592
- Q&A: Choosing Replacement Fender for Tracker Marine Boat Trailer
- Q&A: Can the Fulton 15 Inch Trailer Fender Be Used With 14 Inch Wheel To Provide More Clearance
- Q&A: Using the CE Smith Fender as a Replacement for a Karavan Fender
- Q&A: Recommended Way to Charge my Trailer's Breakaway Battery
- Article: Where to Position the Trailer Axle?
- Article: Adding Electric Over Hydraulic Disc Brakes
- Article: Trailer Tire Sizing
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: Trailer Wiring Diagrams
- Article: Trailer Lighting Requirements