Replacement for 32 Inch Long Slipper Spring
Updated 12/05/2022 | Published 12/04/2022
Question:
Do you sell this size. I dont see it on your website. 32 In. Trailer Spring, 4 Leaf, Slipper
asked by: Deno S
Expert Reply:
I may have a solution, but unfortunately we do not have a 32" long 4-leaf slipper spring. In addition to length, you also need the width and capacity when choosing replacement slipper springs. The leaf count doesn't matter.
Assuming you're looking for 1-3/4" wide slipper springs for a 2,900 lb axle you may still be able to use the # e49SR. The length is measured from the center of the eye to the end of the slipper. This measures 30" long, but if your existing leaf springs are flat they will be elongated. Make sure you take this into account when measuring your existing slipper springs. If the # e49SR was completely flat it would actually measure 32-3/4".
Product Page this Question was Asked From
3-Leaf Slipper Spring w/ Flat End for 2,900-lb Trailer Axles - 30" Long
- Trailer Leaf Springs
- Slipper Springs
- 9/16 Inch Eye
- Nylon Bushings
- 2900 lbs
- 1-3/4 Inch Wide
- 3 Leaf
- 30 Inch Long
- Standard Grade
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Replacement 7,000 lbs Dexter Axle w/ 95" Hub Face and 80" Spring Seat
- Shop: U-Bolt Kit for Mounting 5,200-lb to 7,000-lb, Round Trailer Axles - 7" Long U-Bolts
- Shop: Dexter Trailer Axle Beam with E-Z Lube Spindles - 95" Long - 7,000 lbs
- Shop: Trailer Hitch
- Search Results: heat shrink connectors
- Search Results: springs
- Video: Installation of the Dexter Trailer Axle Beam with E-Z Lube Spindles on a Trailer
- Q&A: Replacement Axle, Hubs, Brakes, and Tires for Older Trailer With Dexter 22834 Hub
- Video: Detailed Breakdown of the U-Bolt Kit for Mounting 5,200-lb to 7,000-lb, Round Trailer Axles
- Shop: Adjustable Width Trailer Hitch Receiver for RVs, 22" to 72" Wide
- Shop: Deka Heat Shrink Butt Connector - 16-14 Gauge - Nylon Insulation - Blue - Qty 10
- Shop: etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class IV - 2"
- Video: Checking Out the U-Bolt Plate for 2" Diameter Axle, 1-3/4" Wide Spring
- Q&A: 1-3/4 Inch Slipper Spring That is 30 Inches Long and Over 2,500 lb Capacity
- Shop: CE Smith U-Bolt Kit for Mounting 2" Square Trailer Axles - 4-1/2" Long U-Bolts - Zinc
- Q&A: Should Spring Seats be Welded to Trailer Axle
- Video: Hands-On with the SumoSprings Trailer Helper Springs w/ Line Relocation Bracket
- Video: Dexter Trailer Axle Beam with E-Z Lube Spindles Review
- Shop: 2-Leaf Slipper Spring w/ Radius End for 1,000-lb Trailer Axles - 24-5/8" Long
- Q&A: Replacement Slipper Springs for 1982 Cox Boat Trailer
- Video: Ultimate Overview of the CE Smith U-Bolt Kit for Mounting 1-1/2" Square Trailer Axles
- Video: In-Depth Review of the 4-Leaf Slipper Spring w/ Radius End for 2,000-lb Trailer Axles
- Article: How to Accurately Measure Trailer Leaf Springs
- Q&A: Recommended Bearing Protectors for a Boat Trailer w/a 1.98" Inner Hub Diameter
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: Can Radius End Leaf Spring Be Used to Replace Flat End Leaf Spring
- Article: How Much Does a Boat and Trailer Weigh?
- Article: Slipper Spring Trailer Suspension System Review
- Article: Double-Eye Trailer Suspension System Review
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
on Trailer Leaf Springs
