Diameter of Bottom of Replacement Cap Plug for Demco 5th Wheel Hitch Installation Kit

Question

Question:

What is the diameter of the bottom of the plug?

asked by: Don

0

Expert Reply:

The Replacement Cap Plug for Demco 5th Wheel Hitch Installation Kit part # DM14335 is designed for the Demco 5th Wheel Underbed Mounting Kit. The Demco 5th Wheel Underbed Mounting Kit which uses 2" diameter holes so that is what the diameter of the bottom part of the plug is.

Unfortunately, we don't have any other dimensions of the Replacement Cap Plug for Demco 5th Wheel Hitch Installation Kit.

expert reply by: Conner L

0

Diameter of Bottom of Replacement Cap Plug for Demco 5th Wheel Hitch Installation Kit
(click to enlarge)

Answer 1

Yes, we have both the BAK Revolver X2 #BAK39331 and X4 #BAK49ZR for your 2024 Ford F-250 long bed. The diameter of the cover rolled up is going to be between 10-12". This can vary as the cover often sits for oblong than a perfect circle. The…

view full answer...

Answer 2

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 3

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 4

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 5

Hey Satran. The tallest 5th wheel hitch we have with a 30,000 lbs capacity is the Reese M5 item #RP68FR. This fits the Ford factory puck system and has three adjustable heights of 14", 16", and 18". The B&W Companion OEM 5th Wheel…

view full answer...

Answer 6

Hey Mark, we have the RetraxPRO MX part #RT80485 that is a confirmed fit for your 2024 GMC Sierra 3500 long bed. The fit of this is not based on the OEM puck kit as that would not affect anything related to the cover. Are you wanting to cover a fifth…

view full answer...

Answer 7

Hey Robert, the Access tonneau cover part #A24AU can work with a ladder rack but it has to be one that attaches to the top of the bed rails and not one that wraps around them like the Yakima Overhaul. For a ladder rack that installs like that the…

view full answer...

Answer 8

Hey Keith, yes the Reese Ford puck adapter part #RP30156 that you referenced is what you would need. This fits the OEM pucks of your 2019 Ford F-450 and also provides the type of rails that your Pullrite ISR hitch is designed to fit so it work…

view full answer...

Answer 9

Hey Matt, we have a topper from Fas-Top that fits the 8 foot long bed versions of the 2024 Ford F-350 with the part #FT63EV but the part #FT84MV only fits the short bed trucks and would not work for you. The Solo is just the topper whereas the…

view full answer...

Diameter of Bottom of Replacement Cap Plug for Demco 5th Wheel Hitch Installation Kit

Product Page this Question was Asked From

Continue Researching