What Causes 14 Error Code on Air Lift WirelessONE Compressor System

Published 11/16/2022

Products Featured in This Question

Air Lift WirelessONE Compressor System for Air Helper Springs - Remote - Bluetooth - Single Path

(589)

$427.58

Air Lift WirelessONE Compressor System for Air Helper Springs - Remote - Bluetooth - EZ Mount

(589)

$514.90

Question:

I have the airlift wireless. I recently started having an issue with the compressor. Im getting this same code come up. Compressor open 14. But my compressor stays running. Now my bags are completely flat. What could be causing this? I checked the ground and its good.

asked by: Rolando M

Expert Reply:

If you have the Air Lift WirelessONE Compressor System like part # AL25980 or part # AL25980EZ then you can simply look in the owner's manual for said error code as there should be a chart which references this and provides a suggested solution. I went ahead and did this for you and what I found was that the "14" error code represents a compressor that is under current and the proposed solution for this is to first check the battery and ground connections. If this does not fix then issue then disconnect the compressor and test on the bench using 12 volts. After this is done you will need to remove and reinstall the 15A fuse to reset the fault.

expert reply by: Conner L