What Are The Dimensions Of The TorkLift PowerArmor Solar Single Locking Battery Box?

Question

Question:

What are the specs of this? Just want to be clear

asked by: Albert

1

Helpful Expert Reply:

According to TorkLift, the TorkLift PowerArmor Solar Single Locking Battery Box # TLA7720RS measures 17-3/4" long x 8-3/16" wide x 12-7/16" tall.

This battery box also includes a solar panel that also provides power for stored batteries, and will bring the batteries back to 50 percent.

expert reply by: Bryce D

1

Battery Box Dimensions
(click to enlarge)

Answer 1

Hey Phil! For a tandem axle trailer you will want two of the Leveling Kit with Wheel Chocks for Trailers and RVs #WS28ER. You are correct, one under each tire is best. I use these on my Jayco with one under each tire to keep them off the ground and…

view full answer...

Answer 2

The TorkLift PowerArmor Solar Single Locking Battery Box #TLA7720RS has pre-cut holes at the bottom of the battery box, which you can use the included battery straps to loop through and around your battery, securing your battery.

view full answer...

Answer 3

The best battery box to mount a 12 volt battery to an A-frame is the TorkLift PowerArmor Solar Single Locking Battery Box #TLA7720RS because it allows you to mount, protect and easily use a 12 volt battery to power your Electric Trailer Jack…

view full answer...

Answer 4

The inside width of the Blaylock #BLTL-23 is 3-1/4 inches, as you can see in the photograph I've edited for you. I don't know which website you're referring to, but the information is incorrect.

view full answer...

Answer 5

While you can add a second battery to power lights, this is going to require a second, 12 volt auxiliary battery; this is the same concept you were thinking of but a breakaway system battery isn't going to have the power or amp hours needed for…

view full answer...

Answer 6

The best way to power the interior lights in your trailer is with its own independent battery. You will not want to use the breakaway battery. The breakaway battery is only designed to operate the breakaway and will drain extremely quickly,…

view full answer...

Answer 7

The type of battery you are looking for to use with the Dutton-Lainson StrongArm Electric Trailer Winch #TW4015 is just going to be a 12 volt battery rated for a minimum of 40 amps, and this is going to be a standard vehicle battery. There are so…

view full answer...

Answer 8

If you're only wanting to setup AC service in your enclosed trailer then you could choose pretty much any 30 or 50 amp power inlet you wanted and then just run the appropriate gauge wire between the inlet and your panel. You can definitely…

view full answer...

Answer 9

You are correct in your description of how to wire in a new auxiliary battery in your enclosed trailer. You will take the 7-Way's 12V power feed and route this to the positive terminal on the auxiliary battery, and you will ground the second…

view full answer...

Answer 10

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

view full answer...

Answer 11

The TorkLift HiddenPower Under-Vehicle Battery Mount with Battery Box #TLA7730 or the TorkLift HiddenPower Under-Vehicle Battery Mount with Battery Box #TLA7726 are ideal for the mount style and location you need. If you want a metal box, then I…

view full answer...

What Are The Dimensions Of The TorkLift PowerArmor Solar Single Locking Battery Box?

Product Page this Question was Asked From

Continue Researching