Replacement Safety Cable Needed for Roadmaster Nighthawk Tow Bar

Question

Question:

Dear Sirs: I have a Roadmaster Nighthawk tow bar that has a damaged safety cable. Roadmaster customer service says that I need part # 910676 to replace it. Do have this part? Thanks

asked by: Mark L

1

Helpful Expert Reply:

To replace the 8K Hybrid safety cables that came with your Roadmaster Nighthawk tow bar you'll need the kit # RM-674 which comes with 2 of these cables.

These are the same design as your current setup and they come with a limited lifetime warranty.

Attached is a review video for you to check out.

expert reply by: Jon G

1

Answer 1

Hi David; do you mean the safety cables or the 7-way to 6-way cord? There is no breakaway that comes with the Roadmaster Nighthawk All-Terrain Tow Bar #RM-676. The breakaway typically comes with a brake system like the Curt RVi Series Shadow 2…

view full answer...

Answer 2

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Answer 3

The best way to attach safety cables like #RM-643 would be to use safety cable extensions like #RM-910648-20 and loop them around the frame members just behind the bumper. This is confirmed by Roadmaster.

view full answer...

Answer 4

Do not worry we will treat you great here. You have a faulty motion sensor or there is a short inside the unit. If it is a new unit and is in fact the LED RV Security Light - Motion Detector - Surface Mount - Clear Lens - Warm White #CE76FR then…

view full answer...

Answer 5

From what I'm seeing, the manual transmission models of the 2007 Subaru Forester can be flat towed and a complete flat towing setup consists of base plates, a compatible tow bar, safety cables, tow bar wiring, supplemental braking and possibly a…

view full answer...

Answer 6

They sure will Bud! The Roadmaster Falcon 3HD Tow Bar item #RM27NQ is compatible with the same D-Ring adapters like item #RM-035-1 or item #RM-035 as the older Falcon 2 tow bar item #RM-520. The difference between the tow bars is increased capacity…

view full answer...

Answer 7

Hey Steve! That is a great question. The main difference between the Curt RVi Series 4 #RVI44FR and the old 3 is the new e Bullseye Wireless Monitor. They made a few other minor upgrades such as the speaker and the button seeing an improvement but…

view full answer...

Answer 8

Great question, John. The Curt #RVi44FR is designed to push against the seat pan for proper operation, but if your Gladiator has a totally flat floorboard, you’ll want to use the included Phantom Bracket to create a secure backing. It installs under…

view full answer...

Answer 9

Absolutely, Dave. You can fine-tune the Curt RVi Series 4 Portable Flat Tow Brake System #RVI44FR 's brake pressure and sensitivity right from the Bullseye monitor in your motorhome. In your case, some people try stepping down from Small SUV to…

view full answer...

Answer 10

Hey Karl, a set of 68 inch long safety cables like the part #RM-643 would be what you'd want. There aren't really a whole lot of different length cables for different setups so its best to just go with this set which is what Roadmaster…

view full answer...

Answer 11

Hello John, You are not able to find it, because it is not there to be found on the 2020 Jeep Grand Cherokee. You will need to install the Roadmaster Stop Light Switch Kit #RM-751449. Are you knew to flat towing, or getting a new vehicle set-up?

view full answer...

Replacement Safety Cable Needed for Roadmaster Nighthawk Tow Bar

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching