Recommended 4-Way Flat Wiring Harness For an Aluminum Trailer
Published 10/11/2022
Products Featured in This Question
Question:
I want to purchase a harness for my trailer. Its all alumimnum so what do I need to ground the lights? Should i run a ground to each? I plan on using a 4 flat connector. thank you!
asked by: Danile
Expert Reply:
I prefer to us a harness like the 25 Ft 4-Way Trailer Wiring Harness # A25W2GWB as it has a ground wire that will run the full length of your wiring so you will not have to tap into the trailer for a ground source. This will help you to waterproof your connections to your tail lights using Heat Shrink Butt Connectors # DW05744-10 and reduce the chances of corrosion/oxidation between the ground wire and trailer frame leading to issues with the lights later down the road. Since the front of the wiring with the 4 way plug has several loose wires you will want to use the Hopkins Endurance Easy-Pull 4-Flat Extension # HM47114 to connect from your tow vehicle to the front of the trailer. Having the bonded wires reduces the chances of the wiring becoming damaged and the ring on the connector gives you an easy pull location when removing from the tow vehicle. Be sure to use Dielectric Grease # 11755 on the 4-way connectors to protect the terminals.
Product Page this Question was Asked From
25 Ft 4-Way Trailer Wiring Harness - Wishbone Style - 25' Ground
- Trailer Wiring
- Trailer Connectors
- Trailer End Connector
- 4 Flat
- Plug and Lead
- Optronics
more information >
Continue Researching
- Shop: Trailer Wiring
- Article: How to Replace Trailer Leaf Springs in 5 Steps
- Shop: 25 Ft 4-Way Trailer Wiring Harness - Wishbone Style - 25' Ground
- Search Results: junction box
- Shop: Trailer Wiring Junction Box
- Shop: Trailer Wiring Junction Box - 7 Color Coded Terminals - ABS
- Q&A: Torque Specs for Spacer and Caliper Bolts on Kodiak Disc Brake Kit # K2R1058D11E
- Q&A: How Tight Should Shackle Straps and Bolts Be Tightened On Trailer
- Q&A: How Tight Should Shackle Bolts Be Tightened On Trailer
- Q&A: How Tight Should Shackle Bolts Be On Tandem-Axle Trailer Hanger Kit # APT7
- Q&A: Torque Rating Requirements for Installing Leaf Springs on a 7000 lb Tandem Axle Trailer
- Search Results: dw05744~10
- Search Results: a35w42b
- Q&A: Trailer Wiring Harness Compatible with Peterson 435800 Trailer Stop/Turn/Taillight
- Q&A: How To Wire 4-Pole Harness with 5 Wires
- Shop: Curt Tail Light Converter with 4-Way Flat Trailer Connector
- Search Results: led rear lights
- Shop: Double Bullseye Trailer Clearance, Side Marker Light, Two-Bulb - Amber
- Shop: Hot-Line LED Third Brake Trailer Light Bar w/ Reflector - Stop, Turn, Tail - Submersible - Red Lens
- Shop: LED Trailer Clearance or Side Marker Light with Reflex Reflector - 2 Diodes - Red Lens
- Video: In-Depth Review of the 25 Ft 4-Way Trailer Wiring Harness
- Article: Trailer Wiring Diagrams
- Video: The Low-Down on the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Shop: Trailer Hitch
- Search Results: trailer hitch
- Video: How to Choose a Trailer Brake Controller
- Search Results: trailer wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Suspension Enhancement
- Video: Curt T-Connector Vehicle Wiring Harness Review C56040
on Trailer Wiring
