Spindle Nut Recommendation for a 3,500 lb Axle
Updated 11/25/2013 | Published 11/24/2013
Products Featured in This Question
Question:
I need to know if this product will work as a spindle nut for the 3500lb axle I recently purchased this axle did not come with the nuts. I believe the thread type is 13/16-20. I cannot find crown nuts for this application so I am thinking this will work just as well assuming its the correct thread type.
asked by: Jody F
Expert Reply:
Since you have a 3,500 lb axle most likely the diameter of the threaded portion of the spindle is 1 inch. You will need to verify that. And since the spindle has a hole in it for a cotter pin you would need a castle nut.
For that I would recommend the Trailer Spindle Nut # 165686. For a compatible cotter pin I would recommend the Cotter Pin part # 165649.
The Spindle Nut Kit # RG05-100 that you referenced is for a different style spindle so I would not recommend it for you.
Product Page this Question was Asked From
Spindle Nut Kit for EZ Lube Axles
- Accessories and Parts
- Trailer Spindles
- Spindle Nut
- 1 Inch I.D.
- Redline
more information >
Continue Researching
- Search Results: spindle nut
- Search Results: hydraulic brake lines
- Search Results: st215/75r14
- Search Results: drum brakes
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Search Results: wire connector
- Search Results: wire splice
- Search Results: electric brake controller
- Shop: Trailer Spindle Nut 1"
- Shop: Spindle Nut Kit for EZ Lube Axles
- Shop: Goodyear Endurance ST235/80R16 Radial Tire w/ 16" Eagle Aluminum Wheel - 8 on 6-1/2 - LR E
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Shop: etrailer Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3,500 lbs
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Q&A: What Is The Part Number For Replacement Brake Shoes For AKEBRK-35-SA Brakes?
- Video: Spindle Nut Kit for EZ Lube Axles: The Breakdown
- Video: Step-By-Step Installation for the etrailer Hub Bearing Kit - Utility Trailer
- Q&A: Replacement Axle Nut for 3500 lb Boat Trailer Axles
- Q&A: Difference Between an Idler Hub and a Hub/Drum
- Q&A: Replacing Grease in Trailer Hub that Has Bearing Buddies
- Q&A: How to Find Replacement Electric Drum Brakes for a Trailer
- Q&A: What Size Nuts Are Needed To Secure 10" Dexter Nev-R-Adjust Electric Trailer Brake Kit
- Q&A: What Hubs/Drums and Brakes Fit My Lippert 3500 E-Z Lube Axles with 5 on 5" Bolt Pattern?
- Video: Timken Bearing Kit Step-By-Step Replacement - Utility Trailer
- Video: Remove and Reinstall a Trailer Hub Review
- Video: All You Need to Know About the Kodiak Disc Brakes
- Video: Detailed Breakdown of the Replacement Spindle Washer
- Video: What to Know About the Powerbuilt Deluxe Bearing Packer
- Shop: Brake Controller
- Article: Trailer Wiring Diagrams
on Accessories and Parts
