Availability of Lift Kit for 5,200 lb Dexter Torflex Trailer Axle

Question

Question:

Have a cargo trailer with 5200# Dexter Torsion axles. They are mounted to s 3 bracket that is welded to the frame. Is there a lift kit with the 3 brackets?

asked by: Jeff

0

Expert Reply:

For a 5,200 lb Dexter Torflex axle we have the Dexter lift kit part # K71-724-02 which will give it a lift of 2-7/8 inches. I am not totally sure what you mean by the 3 brackets but this kit has holes that are 9 inches apart and was designed for side mount Torflex axles and not the top ones.

expert reply by: Jameson C

0

Answer 1

Your Dexter 5,200 lb torsion axles will use the Torflex Lift Kit - Tandem Axle - 2-7/8" Lift #K71-724-02. This is a 2-7/8 inch lift that will work well with your trailer.

view full answer...

Answer 2

It can be very hard to accurately estimate the fuel mileage increases while using a tuner as there are just too many variables involved, many of which are dependent on driving habits. That said, the best option we can offer your 2013 Ford F-150…

view full answer...

Answer 3

I reached out to my contact at Dexter Axle who said that based off of the numbers you sent in it sounds like you have a #11 Torsion axle rated for 5,200 lbs that is on a Haulmark Trailer manufactured back in 2001 (at least the axle was). Your axle…

view full answer...

Answer 4

Since the trailer was off of the ground it would not take much voltage to stop the wheels from spinning so they may be getting power but they may not be getting enough power due to a short or wiring issue. But 9 times out of 10 weak trailer brakes…

view full answer...

Answer 5

The lift kits we carry fit with specific axles; the #K71-725-02 is a tandem axle application and will give a 3-1/8" lift and is compatible with side-mounted #12 Torflex axles with 5,500-7,000-lb capacities. If that is what your axle is, this kit…

view full answer...

Answer 6

Thanks so much for the photo that was super helpful, and what the axle tag shows is that you have a #11 Dexter Torflex axle. We do have the correct lift kit for you, which is the following part: - Torflex Lift Kit - Tandem Axle #K71-724-02 This kit…

view full answer...

Answer 7

Hey Sean, thanks for reaching out. We may have a lift kit for you but the best way to determine exactly what kit to use will be to measure the distance between the mounting holes on your axle. The #K71-724-02 kit you were looking at fits axles with…

view full answer...

Answer 8

Hey Seth, thanks for reaching out! I believe you have the Torflex #11 axles which means you would need the Torflex Lift Kit #K71-724-02 for a 2-7/8" lift. I recommend checking the tag on your axle to make sure this is accurate. If you find…

view full answer...

Answer 9

Based on the available information for your 2022 Airstream Flying Cloud 30FB it looks like you have Dexter #11 Torflex axles. Assuming that is accurate, you need the Torflex Lift Kit - Tandem Axle - 2-7/8" Lift #K71-724-02. I recommend verifying…

view full answer...

Answer 10

Hi Nick, unfortunately we don't have anything with bolt holes that are 9-3/4" apart on center, just 9-1/2" apart, so you may want to measure to get as exact as possible. Also, does your axle have a number on it, either 10 or 11, just…

view full answer...

Answer 11

Hello BJ, thanks for reaching out. We should have a lift block kit that will work for you, but I will need a bit more info on your trailer. Specifically I will need to know your axle weight capacity. This will help us know which lift kit is correct.…

view full answer...

Answer 12

Yes, the Torflex Lift Kit #K71-724-02 is compatible with your #11 Torflex axle. The note about the 3" high profile bracket is corresponding to the brackets on the axle and not the Trailer Hanger #DX57FR. Your brackets appear to be 3-3/4"…

view full answer...

Availability of Lift Kit for 5,200 lb Dexter Torflex Trailer Axle

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching