How To Adjust The Width Of The Ramps On The Roadmaster Tow Dolly

Updated 02/24/2025 | Published 09/09/2022

Question:

How do I adjust the width of the tow dolly ramp ?

asked by: Larry L

Expert Reply:

When it comes to adjusting the ramps on The Roadmaster Tow Dolly # RM-2050-1, you will have to un torque the bolts and then you can slide the ramps to the left or the right to correspond to the width of towed vehicle's tires. Make sure to align the ramps so that both tires will be centered on the ramps, and so that the ramps will be an equal distance from the center of the axle.

If the ramps are not adjusted as described above, the dolly may veer to the left or the right during towing, which may cause a loss of vehicular control.

I attached a review video link below.

expert reply by: Noah E

Adina

2/24/2025

The video does not show HOW to adjust the ramps. Can w please advise how to adjust?

Jerred H.

2/24/2025

@Adina We do not have a video of the ramps being adjusted. The steps listed above are spot-on in how to adjust the ramps. If you would like to see them in more detail, I have linked the installation instructions for the Roadmaster item # RM-2050-1. You'll want to skip ahead to page 5. The assembly instructions cover in specific detail how to adjust the ramps.