U-Bolt Dimension Measured on Bolt Centers
Updated 11/20/2013 | Published 11/19/2013
Question:
Please provide a precise dimension for the distance from the CENTER of the bolt on one side to the CENTER of the bolt on the other side. It appears that the actual INSIDE width measured from the inside of each bolt is greater than 1.5 Thank You!
asked by: Larry J
0
Expert Reply:
I pulled a Replacement U-Bolt with Nuts # 1753223 from our warehouse to measure the distance between the U-bolts measured on center and found that dimension to be right at 2 inches.
Check out the video I attached that shows me taking this measurement with a dial caliper.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Replacement U-Bolt for 1-1/2" Wide, Square Trailer Axles - 1/2" Diameter - Raw Finish
- Trailer Suspension Parts
- U-Bolts
- Camper
- Car Hauler
- Utility Trailer
- 3500 lbs
- Square Axle - 1-1/2 Inch
- 1/2 Inch Diameter
- 5 Inch Long
- Redline
more information >
Continue Researching
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Q&A: Mounting Hardware for 10" Dexter Hydraulic Brake Assembly
- Article: How to Accurately Measure Trailer Leaf Springs
- Q&A: Can I Replace a 195/75-14 Tire with a 205/75-14 Tire on my Boat Trailer
- Q&A: What Is Needed To Swap An Axle And Hubs To American Parts On A Harbor Freight Trailer?
- Q&A: Is 1-1/2 Square Trailer U-Bolts # SP01-120 Galvanized
- Q&A: Replacement Leaf Springs for Harbor Freight Folding Trailer
- Q&A: Replacement Leaf Springs and Shackles for 2012 Eclipse Attitude Toy Hauler
- Q&A: Can 4.80-12 Tire be Replaced with ST145/R12 Tire Using the Same Wheel
- Article: How To Measure And Replace Everything In Your Hub Assembly
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: How to Charge a Dump Trailer Battery
- Article: REDARC's BCDC Charging Process Explained