Dimensions of Replacement Hitch Tite Anti-Rattle Hitch Pin # SA3015

Question

Question:

Im trying to find a captive threaded nut replacement solution for my 1-1/4inch yakima rack.....and wondering of this unit might be a replacement? Can you provide the overall length of this plastic piece into the 1-1/4inch shank relative to the plastic seat where it sits flush against the shank opening to the CENTER of the Pin eyelet? This will give me an idea if it will work with my Yakima Rack! Thanks

asked by: Nate

0

Expert Reply:

The Replacement Hitch Tite Anti-Rattle Hitch Pin # SA3015 has the following dimensions(see image). From the center of the nut to the ears is 1-1/2". The overall length is 2-1/4" and the insert section is 7/8" by 3/4".

expert reply by: Bud M

0

Dimensions of Replacement Hitch Tite Anti-Rattle Hitch Pin # SA3015
(click to enlarge)

Answer 1

The extra hole on the side of the Replacement Aluminum Hitch Adapter Sleeve for Saris 1-1/4" Hitch Bike Racks #SA3032 that you referenced is use for attaching the adapter with the included nut and bolt to the shank of the bike rack. Basically…

view full answer...

Answer 2

The #SA3032 adapter sleeve is not threaded, but the shank of the Saris bike rack (I'm assuming you mean Saris, not Solaris) is threaded. The anti-rattle hitch lock for a Saris bike rack is part #SA3022.

view full answer...

Answer 3

Replacement hitch pins are designed to be specific to your bike rack, so knowing which model you have is important to ensure you get the right hitch pin. That said, the Replacement Hitch Tite Anti-Rattle Hitch Pin for Saris Bike Racks with…

view full answer...

Answer 4

The Saris bike racks all use either a 2" hitch connection for a 1-1/4" hitch connection, there is no in-between. Furthermore, the 2" hitch connections are usually composed of a 1-1/4" to 2" adapter therefore this can be…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 7

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Dimensions of Replacement Hitch Tite Anti-Rattle Hitch Pin # SA3015

Product Page this Question was Asked From

Continue Researching