Is Saris SA3032 1-1/4 to 2 inch Hitch Adapter Threaded for Hitch Pin  

The extra hole on the side of the Replacement Aluminum Hitch Adapter Sleeve for Saris 1-1/4" Hitch Bike Racks #SA3032 that you referenced is use for attaching the adapter with the included nut and bolt to the shank of the bike rack. Basically…

Replacement hitch pins are designed to be specific to your bike rack, so knowing which model you have is important to ensure you get the right hitch pin. That said, the Replacement Hitch Tite Anti-Rattle Hitch Pin for Saris Bike Racks with…

The Replacement Hitch Tite Anti-Rattle Hitch Pin #SA3015 has the following dimensions(see image). From the center of the nut to the ears is 1-1/2". The overall length is 2-1/4" and the insert section is 7/8" by 3/4".

The Saris bike racks all use either a 2" hitch connection for a 1-1/4" hitch connection, there is no in-between. Furthermore, the 2" hitch connections are usually composed of a 1-1/4" to 2" adapter therefore this can be…

Though the Curt # C13409 and Draw-Tite #76271 are nearly identical to each other, there are a few subtle differences. First being where they sit once installed. The will both have the exact same height of 14-1/2 inches, but the Draw-Tite #76271 will…

Yes, since the thread size and length is different on the threaded hitch pins of the different bike rack manufacturers you have to stick with the same brand of hitch pin lock. So like in your case you need to stick with the Saris #SA3022.

I do have a solution for you, however because of the unique thread design on the shank for your Saris Freedom 2 Bike Platform Rack #SA4412B, the HitchMate Threaded Trailer Hitch Receiver Lock #HE6001 that you referenced will not be compatible. For a…

The Thule Passage 2 Bike Carrier - Trunk Mount #TH910XT is indeed a fit for your 2018 Buick Encore. Now, trunk bike racks are typically not suitable for electric bikes due to the excess weight that electric bikes have. It looks like your Aventon Pace…

The Pro Series Q-Slot PS63138 is designed for 45-lbs per bike. The bike carrier is designed to have the 140-lb weight capacity distributed evenly when four bikes are loaded and is not designed to handle the total weight of 140 lbs when just two bikes…

I do have an option for you but I can't confirm that the Trailer Hitch Anti-Rattle Kit part #F-315 will work with the Kuat Transfer 2 Bike Platform Rack part #KU74FR. They are just not simply tested for use with one another. Instead, I recommend…

No, using a reducer sleeve like the #e63YR will not reduce your tongue weight capacity. The reduction of weight capacity only applies to an extension. With extensions you are bringing the center of weight farther from the hitch, which exaggerates the…