Curt Trailer Hitch Receiver Compatibility With a 2015 Buick LaCrosse With Dual Exhaust

Question

Question:

I am considering the curt 12115 for my 2015 Lacrosse. Directions say exhaust must be lowered to install.... video does not show that happening? also the video shows only one exhaust pipe , my Lacrosse has two . Any issues there? thanks for the help

asked by: George C

1

Helpful Expert Reply:

You will not have any issues mounting the Curt Trailer Hitch Receiver # C12115 on your 2015 Buick LaCrosse with the dual exhaust. Since this receiver fits a large selection of Buick, Chevrolet and Cadillac vehicles the installation notes will cover all the different vehicles but some steps like lowering the exhaust will not always be necessary. For your LaCrosse I do not see any need to lower the exhaust.

Curt recommends using their Cam Buckle Stabilizing Strap # 18050 for any hitch mounted accessories. If you plan on towing a small trailer you will need either their 2" Euro Style Drawbar # C45572 or 1-7/8" Euro Style Drawbar # C45571 to match the trailer coupler. A Hitch Pin and Clip # F-4 will secure the drawbar in the receiver. And finally a Vehicle Wiring Harness # 56098 will give you a 4-way flat connector. This will control the lights on small trailers using a 4-way and can also be used with Auxiliary Lights # C53201 if you have a hitch mounted accessory that impairs the view of your tail lights.

expert reply by: Bud M

1

Answer 1

The Curt Trailer Hitch Receiver #C12115 is a confirmed fit for your vehicle. I reached out to my tech contact and he said it sounds like you may be installing it on the wrong side. He said it is an interesting configuration from most other hitches…

view full answer...

Answer 2

The Curt Hitch part #C12115 is a fit for your 2016 Buick LaCrosse with dual exhaust. We have confirmed this with our contacts at Curt. All of the needed install hardware is included. You should have no problem using jack stands to install this hitch…

view full answer...

Answer 3

For your 2015 Chevrolet Malibu Turbo I recommend the Curt Trailer Hitch, part #C12115. This hitch is a Class ll hitch and has a 1-1/4 inch receiver opening. I spoke with my contact at Curt and they told me that the dual exhaust should be no issue…

view full answer...

Answer 4

We've asked Curt this exact question for a previous customer and the confirmed that their hitch part #C12115 does fit the dual exhaust versions of the 2014 Chevy Malibu like yours. This would work great with a bike rack like the Hollywood Racks…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Curt Trailer Hitch Receiver Compatibility With a 2015 Buick LaCrosse With Dual Exhaust

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching