Recommended Grease Cap With Grease Fitting
Updated 08/17/2022 | Published 08/15/2022 >
Products Featured in This Question
Question:
I saw the question about the trailer 1 15/16inch 1.9375 dust cap with the replacement part being the Fulton F001524 however, I am looking for a cap that also has the grease fitting so I can grease everything without taking it apart. I only use to the trailer to haul my lawn tractor, etc. No usage in water. My current dust caps have almost a knife edge and the ones I have seen in stores are almost are thicker. Ive also heard the spring loaded caps with grease fittings push grease out the back and fling it all over the wheels. Really not looking for that mess either. Any recommendations would be appreciated.
asked by: Andy T
Expert Reply:
Since I'm assuming you don't have an E-Z Lube axle or some equivalent with the zerk fitting on the end of the spindle, the only option would be to use a Bearing Buddy. What you have heard about the grease getting pushed out of the back only happens if they are overfilled. As long as you make sure to not add too much grease this will not be an issue.
Before choosing a Bearing Buddy I recommend measuring the hub bore diameter. I would also use a digital caliper like the # PTW80157 since this is a precise measurement and a tape measure isn't accurate enough. If you are just slightly off that is fine since this is a drive in installation. Based on your grease cap you will need one of the following:
-1.938" hub bore # BB1938SS
-1.968" hub bore # BB1968SS
-1.980" hub bore # BB1980A-SS
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Replacement Bearings, Races, and Seals for Trailer
- Q&A: Grease Seal w/ Inner Diameter of 1.687" and an Outer Diameter of 2.561"
- Shop: Bearing Buddy Bearing Protectors - Model 1938SS - Stainless Steel - Qty 2
- Shop: Bearing Buddy Bearing Protectors - Model 1938 - Chrome Plated - Qty 2
- Shop: Dexter Oil Seal - Double Lip - I.D. 1.687" / O.D. 2.561" - 3.7K to 4.2K Axles - Qty 1
- Shop: Replacement Trailer Wheel Bearing - 15123 - Qty 1
- Video: An In-Depth Look at the Hitch Extender for Brophy Hitch-Mounted Stairs
- Shop: Bearing Buddy Bearing Protectors - Model 1968 - Chrome Plated - Qty 2
- Search Results: 1968
- Search Results: f001524
- Shop: Hitch Extender for Brophy Hitch-Mounted Stairs - 2" Hitches - Black Powder Coated Steel
- Video: Protect Your Bearings! Inside Look at Bearing Buddies with the Manufacturer
- Video: Feature Breakdown: Bearing Buddy Bearing Protectors
- Q&A: Looking for 1.94 Inch Grease Cap and 35898 Grease Seal
- Shop: Bearing Buddy Bearing Protectors - Model 1968SS - Stainless Steel - Qty 2
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Search Results: trailer hitch
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Article: How to Measure for Trailer Hitch Drop
- Search Results: trailer wiring
- Q&A: Comparing Kenda KR03, KR35, And KR53 Tires
- Shop: Trailer Wiring
- Shop: Suspension Enhancement
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Video: Hands-On with the Hub Saver Hub and Wheel Protector
- Q&A: Best Suspension Upgrade for 33" Tandem Axles: Road Armor vs Dexter EZ Flex for Ember 22ETS
- Search Results: trailer tires and wheels
- Shop: Brake Controller
- Q&A: What is the Best Grease for Trailer Bearings

