Replacement Disc Brake Kit and Hubs For 2004 DHM 2 Axle Boat Trailer
Updated 08/01/2022 | Published 07/30/2022
Products Featured in This Question
Question:
I need help picking the correct disc brakes and rotors. Rotor measures 9-3/4inch 5 lug 4.5 bolt pattern Will 10inch work? I will also need bearings and seal for all 4 Thank You
asked by: PATRICIA M
Helpful Expert Reply:
Based on the corrosion I see on the parts I recommend the Stainless Steel Kodiak Disc Brake Kit # K2R35S for your trailer. This will use a 10" rotor and all the components are going to be stainless steel for corrosion resistance on one axle. You will need to pair this kit with 2 Hubs # KH84545S for each axle. Each hub will need an Inner Bearing # L68149, and Outer Bearing # L44649. You will need to measure the spindle to determine the correct grease seal. Seal # 58846 (inner diameter 1.719), Seal # 168255TB (inner diameter 1.687"). Finally you will need a Grease Cap # RG04-020 and Lug Nuts # KALN1375S.
Here is a list of all the parts and quantities.
Disc Brake Kit # K2R35S Quantity 2
Hub # KH84545S Quantity 4
Inner Bearing # L68149 Quantity 4
Outer Bearing # L44649 Quantity 4
Grease Seal # 58846 or # 168255TB Quantity 4
Grease Cap # RG04-020 Quantity 4
Lug Nuts # KALN1375S Quantity 20
(click to enlarge)
(click to enlarge)
(click to enlarge)
Product Page this Question was Asked From
Kodiak Disc Brake Kit - 10" Rotor - 5 on 4-1/2 - Stainless Steel - 3,500 lbs
- Trailer Brakes
- Disc Brakes
- Marine Grade
- 5 on 4-1/2 Inch
- Rotor
- 3500 lbs Axle
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Kodiak
more information >
Continue Researching
- Search Results: kodiak 225 ss
- Search Results: brake lines
- Search Results: kodiak 225
- Shop: Demco Master Cylinder Adapter for Power Bleeder - Qty 1
- Video: Demco Master Cylinder Adapter for Power Bleeder Feature Review
- Video: All About the Corner Gate Latch for Utility Trailers
- Shop: Kodiak Disc Brake Caliper Rebuild Kit for 3,500 lb to 6,000 lb Trailer Brakes
- Shop: Kodiak Disc Brake Caliper - Stainless Steel - 3,500 lbs to 6,000 lbs
- Q&A: Will the Demco Master Cylinder Adapter for Power Bleeder Fit on a Dexter Model 60 Actuator
- Search Results: 1/2 hitch pin
- Search Results: corner brackets
- Search Results: add coupon code
- Search Results: add promo code
- Video: Don't Forget the Brake Lines | Tips from the Manufacturer
- Video: Review of DeeMaxx Braided Stainless Steel Hydraulic Brake Line 240 Inch - DE78KR
- Video: Review of DeeMaxx Rubber Hydraulic Brake Line 280 Inch - DE94JR
- Video: Curt Clevis Pin with Handle and Clip Review
- Q&A: How Do You Know if a Trailer Brake Actuator Shock Needs to be Replaced
- Shop: Kodiak Trailer Hub for 3,500-lb Axles - 5 on 4-1/2 - Stainless Steel
- Shop: DeeMaxx Hydraulic Brake Line - Rubber - 3/16" Brass Male Inverted Flares - 23-1/3' Long
- Shop: Dexter Hydraulic Brake Lines and Fittings for Tandem-Axle, Torsion-Axle Trailers
- Shop: DeeMaxx Hydraulic Brake Line - Rubber - 3/16" Brass Male Inverted Flares - 18' 4" Long
- Q&A: 2X4 Stake Pocket That Does Not Require A Tapered Stake
- Q&A: 1/2" Receiver Pin Lock for Bike Racks in Large 2" Receiver Hitch
- Video: Measuring To Choose The Right Trailer Axle
- Q&A: How To Remove Spindles From Trailer Axle
- Q&A: Replacement Bearings, Races, and Seals for Kodiak Disc Brake Kit K2HR79E
- Q&A: How Do Trailer Spindles Typically Install on Trailer Axle