Availability of Solera Awning Replacement Drive Head Cover  

Thank you for the photos! It looks like you have the Regal Style awning head so for a replacement front cover you need part #LC643923 for the idler side. If there is a clip missing on the back cover then I recommend replacing that as well so the…

The Replacement Manual Override Grommet for Solera Powered RV Awnings #LC95ED is designed to fit all Solera powered RV awnings. This is the only manual override grommet we have and while it is round, it should be malleable enough to change shape…

It sounds like you need the Solera Awning Plain Drive Head Front Cover #LC289557 instead of the Replacement Lippert Edge Awning Drive Head Front Cover #LC32NJ you have currently. This cover is wider than #LC32NJ, and is white in color like you…

No, the etrailer Magnetic Hitch Receiver Reducer Sleeve #e28JR will not lower the weight rating of your trailer hitch.

The etrailer Magnetic Hitch Receiver Reducer Sleeve #e28JR is indeed magnetic. Now the whole thing is not magnetic, there are simply two magnets built in to the bottom of the adapter. See the picture below. We chose to add magnets as a…

That's a good question, and there's an interesting reason why there are the long holes on the side of the etrailer Magnetic Hitch Receiver Reducer Sleeve - 2-1/2" to 2" Hitch #e28JR. Using a regular reducer sleeve requires you to…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…