bing tracking image
Day 9 Deal - Save up to 20% on Critter Protection
SAVE NOW
Customer Service My Orders
Q & A Icon

Replacement Hub and Brake Options For 5,200LB Trailer Axle With 4 Bolt Brake Flange  

Updated 07/26/2022 | Published 07/23/2022

Question:

need complete electric brake kit for 1980 WW Stock Trailer. GVWR 6120, GAWR 5200 Front, GAWR 5200 Rear. Trailer has backing plates and Drums on rear axle only but all internal parts are gone. I will need complete kit with drums, Bearings, seals, all brake components on backing plates. Backing plates have 4 bolts for mounting. the top mounting bolts are on 3 1/4inch centers and the bottom bolts are on 2 1/2inch centers but drums are and hub on Front axle are 6 lug on 5.5 centers. I removed the bearings and got numbers off of them. The NTN numbers are 4T-LM67048 for the outer bearing and 4T-25580 for the inner bearing. I need to know if you have anything available for this trailer, even if we need to piece together a custom kit.

0

Expert Reply:

You will need the Dexter Electric Brake Kit # 23-105-106-09 to bolt to the 4-bolt brake flange on your axle. This is a 12" x 2" brake kit that has the same offset mounting bolt pattern that you have on your current axle.

For a hub kit you will need verify if you have an EZ lube spindle and the diameter of your grease seal. You will need to remove one of the hubs to find the inner diameter of the grease seal as either a 2.125" or 2.250". The hubs come complete with bearings, races, caps and lug nuts.

Dexter Trailer Hub and Drum Assembly # 8-201-5UC3-EZ (EZ Lube, 2.125" grease seal)
Dexter Trailer Hub and Drum Assembly # 8-201-5UC3 (Standard, 2.125" grease seal)
Dexter Trailer Hub and Drum Assembly # K08-201-98 (EZ Lube, 2.250" grease seal)
Dexter Trailer Hub and Drum Assembly # K08-201-97 (Standard, 2.250" grease seal)

expert reply by:
0
Bud M
Ask The Experts a Question >>

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>