Replacement Lights For Optronics MC44, 1 Wire Lights In Red and Amber LED Lights

Question

Question:

Do you offer this light in a led version?

asked by: Dan S

0

Expert Reply:

Yes, we do have the Trailer Clearance or Side Marker Light # MC44AB1 available as an LED # MCL44AB1. This has the same 1 wire connection so the ground wire is achieved through the mounting hardware. We also have the Red LED # MCL44RB1 if you have any Red Lights MC44RB1 you would also like to replace with LED's.

expert reply by: Bud M

0

Answer 1

For a light that is similar to the Optronics MC44RB1 but has a 2-wire design you will need the following: - Optronics LED Trailer Clearance or Side Marker Light w/ Reflex Reflector - 6 Diodes - Red Lens #MCL44RB This is the same light, with exactly…

view full answer...

Answer 2

Your broken spring should be color coded to indict the weight rating of it. It'll be spray painted on the roller or the spring itself. I've listed the colors and their respective weights below; White: 10/110/210 LBS Green: 20/120/220 LBS…

view full answer...

Answer 3

The correct replacements we offer for the Glo Brite Marker Lights 118A and 117R is the Trailer Clearance or Side Marker Light part #MC44AB for amber and part #MC44RB for red.

view full answer...

Answer 4

If you're having trouble with the Valterra Gray Water Drain Connector part #T01-0094VP then you can use some pipe tape on all the threaded connections, the Valterra PTFE Thread Seal Tape part #A05-0265.

view full answer...

Answer 5

To replace your NOK AD2527E seal you can use #168233. It has an inner diameter of 1.688 inches and an outer diameter of 2.332 inches. Based on what I could find on the NOK AD2527E the inner diameter is the same and the outer diameter is 2.328 inches.…

view full answer...

Answer 6

For your Glo-Brite 118A amber light the replacement lens that will fit is the Optronics #A44AB; the lights themselves are the Optronics #MC44AB. The Glo-Brite 117R can use replacement lens #A44RB while the light is #MC44RB. I've added links to…

view full answer...

Answer 7

The Replacement Heavy Duty Air Spring for Firestone Airide Commercial Air Springs part #FW013585770 has a compressed height of 4.1". There is an internal jounce bumper built into the air spring in case of a blowout.

view full answer...

Answer 8

I was unable to find the dimensions of that exact model number, but it is a Coleman-Mach AC and based on similar model numbers the most likely correct shroud is the following: - MaxxAir TuffMaxx Replacement RV Air Conditioner Cover for Coleman-Mach…

view full answer...

Replacement Lights For Optronics MC44, 1 Wire Lights In Red and Amber LED Lights

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching