Recommended Replacement 5,200 Pound Axle for Extreme Boat Trailer

Updated 07/18/2022 | Published 07/15/2022

Products Featured in This Question

Timbren Axle-Less Trailer Suspension - Standard Duty - 2" Lift - 5 Bolt Flange - 5,200 lbs

(125)

$1264.30

Dexter Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb Axles - 6 on 5-1/2 - Pre Greased

(1075)

$299.49

Question:

I have a single axle boat trailer with tortion bar suspension made by Extreme. The tortion bar suspension spun so I believe I need to replace the axle. The Hub Face is 93 and 74 outside bracket. Its a 4 plus tube size? I was told to look for Dexter and that it was originally UFP. I need 5200 lb capacity. The axle has a dip in the middle to make room for the boat. Can you recommend / provide a part.

asked by: Bruce P

Helpful Expert Reply:

While we may have an option for you, if you are strictly looking for a 5200 pound axel that has a dip in the middle, we do not carry any axle beams that have that specific dip you need. With that being said, a great option is the Timbren Axle-Less Trailer Suspension System # TASR5200S05. Since the axle-less system comes does not come with a crosstube, you do not need to worry about the axle interfering with the trailer/boat. As far as installation, the Timbrens can be bolted or welded directly onto your trailer's frame. It also provides you with a superior ride than a traditional axle bar because the left and right side react independently to changes/bumps in the terrain.

If you need the hub/drum assemblies as well, those are the # 8-201-9UC3-EZ.

I went ahead and attached some helpful demo videos of these products for your convenience.

expert reply by: Bob C