Power Draw of Optronics Trailer Clearance/ Marker Light # MC65AB
Updated 10/25/2013 | Published 10/24/2013
Products Featured in This Question
Question:
How many amps does the MC65AB light draw?
asked by: Mike S
Helpful Expert Reply:
According to my Optronics representative, the Optronics Sealed Trailer Clearance and Marker Light, part # MC65AB draws a total of 0.6 amps at 12.8-volts. An LED version is also available, part # MCL75AB which draws a fraction of that, 0.06 amps at 12.8-volts. Either lamp is used with a base, part # A65PB in black or # A67CB in chrome plated plastic. The lamp base has a single power wire, and picks up its grounding connection by its mounting hardware being connected directly to the trailer frame.
Product Page this Question was Asked From
Optronics Incandescent Trailer Clearance and Side Marker Light - Submersible - 2 Bulbs - Amber Lens
- Trailer Lights
- Clearance Lights
- Rear Clearance
- Side Marker
- Rectangle
- Surface Mount
- Submersible Lights
- Incandescent Light
- 3-15/16L x 1-1/4W Inch
- Amber
- Optronics
more information >
Continue Researching
- Article: Trailer Wiring Diagrams
- Q&A: Mounting Bracket Options for Optronics Sealed, Thin Line Clearance Side Marker Light # MC65AB
- Article: What are the Common Types of Propane Fittings Used on RVs?
- Q&A: Butyl Tape To Seal Trailer Roof Panel Joint
- Q&A: Replacement 12" Brakes for Fayette Dayton 9254 W-5 Axle
- Q&A: Determining If We Have A Replacement For A Dayton Fayette 9254 Hub and Drum Assembly
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Q&A: Replacement LED Flood Light for Load Lights on a Horse Trailer
- Q&A: LED Flood Light Recommendation for the Sides of a Horse Trailer
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Article: Brake Controller Installation: Starting from Scratch
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Trailer Lighting Requirements
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)