Replacement Grease Seal For Jetski Trailer With 38.1 & 50.29 Stamped On The Seal
Updated 07/12/2022 | Published 07/10/2022 >
Products Featured in This Question
Question:
I’m looking for a Jetski trailer bearing seal. The only number i see on the old seal are 38.1 and 50.29 are you able to look up a part number using those ? Thanks
asked by: Daniel H
0
Expert Reply:
The numbers on your current grease seal sounds like a measurement in mm. That would give you a 1.5" inner diameter and 1.98" outer diameter. The Grease Seals # RG06-020 match that same measurement and fit a 2,000lb axle that is generally found on trailers like your Jetski trailer.
You can always measure the seal with a Digital Caliper # PTW80157 to verify that this is the correct seal.
expert reply by:
Bud M
0

Product Page this Question was Asked From
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.500 Inch I.D.
- 1.987 Inch O.D
- TruRyde
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Q&A: Cross Referencing 10-9 Replacement Grease Seals for Aliner Trailer
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: Hub for E-Z Lube Spindle on Boat Trailer
- Q&A: Can Dexter Replacement Axle Spindle Retainer Kit be Used on Older 84 D Spindle
- Q&A: New Grease Seal Leaked After Installation of Bearing Buddies with Hub Kit # 8-248-50UC1
- Q&A: Which is Better an EZ Lube Spindle or a Bearing Buddy Setup
- Q&A: Can Double-Lip Grease Seals Be Used Without Bearing Buddy Grease Caps
- Q&A: Using Double Lip Seals in Place of Single Lip when Using bearing Buddies
- Article: Trailer Wiring Diagrams
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: What are the Common Types of Propane Fittings Used on RVs?
- Article: Trailer Lighting Requirements
- Article: Trailer Tire Sizing