Replacement Control Plate for MaxxAir Vent Fan Model 4951KSC

Question

Question:

Hello Replacement Control Plate for MaxxFan Roof Vent MA05-20226K I don’t have a keypad on mine and there are holes for it on this replacement. Do you have one like my picture below or is there a sticker that covers that part like pictured Model 4951ksc

asked by: Larry C

1

Helpful Expert Reply:

I was able to confirm with MaxxAir that the Replacement Control Plate for MaxxFan Roof Vent part # MA05-20226K is correct for a MaxxAir Vent Fan Model 4951KSC. The key pad holes are only used on certain models so if yours does not have this they will not be needed. It does not come with any stickers but you will transfer all your old components to the new plate.

expert reply by: Conner L

1

Answer 1

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 2

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 3

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 4

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 5

Hey Nathan, the PowerMax panels like the part #PM59VR that you referenced use 12- VAC residential style miniature circuit brakers. Typical brands are ITE/Siemens, Murray, Crouse-Hinds, and Thomas & Betts.

view full answer...

Answer 6

Hello Jeff, Sounds like you’ve got a big camper (about 4,000 lbs) on your 2024 F-350 dually, and when it’s loaded, the truck feels bouncy and sways a bit. That’s pretty common with heavy campers, especially if the suspension is still stock.…

view full answer...

Answer 7

Hey Brady, Brophy in the past has told us that the tie downs part #HSWB don't have a weight capacity but you would want to make sure you use them only with campers that were designed to fit the bed length of the truck. The turnbuckles part #TDHP…

view full answer...

Answer 8

Hey Cory, Air springs are going to be the best at leveling your F-350 back out once the weight is added but they will most likely affect your unloaded ride quality, even when aired down. That being said, a majority of the unloaded ride quality…

view full answer...

Answer 9

I was able to find out from Dometic, who took over Atwood's water heater division and the Replacement Control Panel #AT91367 you were looking at will be the correct part.

view full answer...

Answer 10

Hey Dave! For a replacement 60A converter that is lithium compatible to replace your 9260C I recommend the Progressive Dynamics 9300 Series RV Converter Charger #PD79RR. Progressive Dynamics makes great products, and this includes all the same safety…

view full answer...

Answer 11

Hi Robert; you could use the LaSalle Bristol Waste Valve #34466N11AA as a replacement but the handle will sit underneath the trailer right at the valve. Looking at the Grand Design parts site it looks like you have a 1-1/2" Valterra with a…

view full answer...

Answer 12

I spoke with Lippert and they informed me that you have a Kwikee 25 Series Step therefore the correct replacement motor for you is the Lippert Components Kwikee Step Motor for 25 Series part #LC369506. The part number number you provided of…

view full answer...

Replacement Control Plate for MaxxAir Vent Fan Model 4951KSC

Product Page this Question was Asked From

Continue Researching