Parts Needed to Flat Tow 2010 Toyota Tacoma
Updated 06/30/2022 | Published 06/29/2022 >
Products Featured in This Question
Question:
I will use a drive shaft disconnect to flat tow my 2010 Tacoma. Considering the following: RM-1175-3 Direct Connect Base Plates RM-522 Tow Bar Brake Buddy Classic 3 portable brake system Are these appropriate ions? What safety chains and lighting kit would you recommend? Anything else I need? Thanks for your assistance.
asked by: Larry
Helpful Expert Reply:
You are correct, the Roadmaster Direct-Connect Base Plate Kit, # 1175-3 is a confirmed fit for the 2010 Tacoma, excluding X-Runner trim package, and this will match well to the Falcon All Terrain, Non-Binding Tow Bar, # RM-522 that you have selected.
In addition to the base plates and tow bar you identified, I recommend the RoadMaster Falcon 2 and Falcon All-Terrain Combo Towing Kit with Straight Wiring, # RM-9243-1 that includes wiring kit, power cord, mounting bracket, safety cables, padlocks, tow bar cover, and a vinyl bag to store it all. And yes, you can use the Brake Buddy Classic 3 Portable Supplemental Braking System, # HM39494 on your 2010 Toyota Tacoma.
- Base Plate Kit, Roadmaster Direct-Connect Base Plate Kit, # 1175-3
- Tow Bar, Falcon All Terrain, Non-Binding Tow Bar, # RM-522
- Wiring, Combo Towing Kit (includes safety cables), # RM-9243-1
- Supplemental Braking, Brake Buddy Classic 3, # HM39494
You may or may not need a high/low adapter. I have linked a help article below that walks you through the steps of measuring to determine this. The objective being, once your tow bar is properly connected to both vehicles, that it set at +/- 3" of level. A high/low adapter is used to compensate where and if needed. A tow bar that is not set at proper height is likely to cause excessive wear on front tires, suspension and steering components of the towed vehicle.
Product Page this Question was Asked From
Roadmaster Direct-Connect Base Plate Kit - Removable Arms
- Tow Bar Base Plate
- Removable Draw Bars
- Hitch Pin Attachment
- Partially Hidden
- Roadmaster
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: RV Covers
- Shop: Roadmaster Accessory Kit for Falcon Tow Bars - Tail Light Wiring - Safety Cables - Lock Set
- Shop: Roadmaster Direct-Connect Base Plate Kit - Removable Arms
- Shop: Base Plate for Tow Bar
- Search Results: disconnect
- Video: The Low-Down on the Adco Olefin HD RV Cover for Class A Motorhomes up to 43' Long
- Shop: Classic Accessories PolyPro III Deluxe RV Cover for Class C Motorhomes up to 32' Long - Gray
- Search Results: rv cover
- Search Results: covers
- Search Results: rv covers
- Q&A: 2007 Toyota Tacoma Base Plate Kit Options to Fit with Roadmaster Tow Bar
- Q&A: Is Drilling Required for the Roadmaster MX Base Plate Kit on a 2007 Toyota Tacoma
- Q&A: Does the BrakeMaster for RVs w/ Air or Air-Over-Hydraulic Brakes RM-9160 Have a Pressure Reducer?
- Q&A: Replacement For Lippert 175226/12656 4-Point Leveling Control Brain
- Q&A: Recommended Flat Towing Set Up for a 2017 Ram 2500
- Article: Can You Flat Tow a Toyota Tacoma?
- Article: Trailer Wiring Diagrams
- Q&A: Replacement for Atwood 61101 Brake Actuator
- Q&A: Roof Rack that Can Fit 2019 Honda HR-V and 2012 GMC Sierra
- Article: Roadmaster Tow Bar Feature Descriptions
- Article: Trailer Maintenance Schedule
- Article: Best Bike Racks for Electric Bikes



