What Kayak Carriers Does Malone TelosXL Assist Fit

Question

Question:

Can I use the TelosXL Load assist with my existing Thule Hull-a-port cradle?

asked by: Ann

0

Expert Reply:

The Telos XL part # MPG351XL is designed to fit into slots that are on the end of the Malone kayak carriers like the # MPG114MD . But you can use it with a Thule carrier if you also went with the # MAL95VR.

expert reply by: Jameson C

0

Answer 1

Hey Mark, thanks for reaching out! We have a great selection of kayak load assists, but the only thing remotely close to a winch that I can think of is the Malone Kayak Hoist #MPG346, which is for kayak storage. Since you're already using Thule…

view full answer...

Answer 2

I recommend the Thule AeroBlade Edge Roof Rack - Aluminum #TH7503-TH7503 as a roof rack system for your kayaks. It's a great sturdy system, and the main perks of this roof rack is how low-profile and quiet it is so you can leave it and go about…

view full answer...

Answer 3

You'll need an adapter, but yes, the etrailer J-Style Kayak Carrier #e98878 is compatible with the Telos XL Load Assist #MPG351XL. What you will need to add is the Universal Roof Rack Adapter Kit for Malone Telos XL Load Assist #MAL95VR. The…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Hey Eddie, the Curt hitch part #C22RJ and the Trailermate part #TMT29FR are both very similar in design and capacity. I really like the Curt hitches and recommend them whenever available but Trailer Mate isn't bad either. If you are wanting the…

view full answer...

Answer 6

Hey Martin, so you did your homework on this but yes you can use the Telos lift assist part #MPG351XL with your Yakima JayLow kayak carrier as long as you also get the universal roof rack adapter part #MAL95VR. This adapter would give you the…

view full answer...

Answer 7

Hey Jeffrey, The instructions for the Rhino-Rack Universal Load Assist #RR-RUSL do not include mounting to the Yakima JetStream crossbars. I checked with Rhino-Rack and they do not have those crossbars as compatible with this load assist so I…

view full answer...

Answer 8

If you need help loading a kayak on your 2019 Toyota RAV4 with a factory roof rack then I do have an option for you but none of the side load assist arms we carry that attach to the crossbars which includes the Rhino-Rack Universal Load Assist part…

view full answer...

Answer 9

It looks to me like you are already setup to safely accommodate one or two Thule Hullavator Pro Kayak Carriers #TH898. The Hullavator requires a minimum of 4" crossbar overhang on each side of the towers, and based on the photos you attached, it…

view full answer...

Answer 10

I went out to our demo warehouse and put together the Malone Canoe Hammock's (part #MPG346) catch pulley together with both ropes to experiment a bit with how the pulley catch worked. What I found out is that the catch is very solid and exactly…

view full answer...

Answer 11

The Telos XL Load Assist for Malone Kayak Carriers part #MPG351XL can be adjusted up to a height of 98-1/4" long. If the roof rack on the vehicle sits higher than this then it would not work without additional props to support the legs such as…

view full answer...

Answer 12

The Malone Hoist System #MPG346 is can be used on your high 13 foot 6 inch ceilings. The system is rated for 120 lb capacity and ceilings up to 14 foot tall. You will have no problem raising your Kayak, Roof Box, or bikes with this system.

view full answer...

What Kayak Carriers Does Malone TelosXL Assist Fit

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching