Where is the etrailer Wheel Lock # 288-02020 Manufactured?

Question

Question:

Greetings, Where is the etrailer Trailer Wheel Lock Item # 288-02020 manufactured? Thanks,

asked by: Stephen K

1

Helpful Expert Reply:

The etrailer Wheel Lock # 288-02020 is made in China. If you are looking for a U.S.A.-made wheel lock, the only one we carry is the Blaylock EZ Trailer Wheel Lock # BLEZ-302. This wheel lock is compatible with most 15" to 20" wheels and also has the ability to be keyed-alike.

I went ahead and attached a demo video of the EZ wheel lock for you to check out.

expert reply by: Bob C

1

Answer 1

It's possible you could drill out the lock of the Trimax wheel lock part #TMX65FR and you'd be able to defeat it that way but Trimax doesn't share with us exactly how to defeat their wheel lock so we can't guarantee that would work.…

view full answer...

Answer 2

The Trimax Adjustable Wheel Lock part #TMX65FR weighs around 18 lbs. It's designed for most 10" - 18" wheels for either vehicles or trailers. The device stops the wheel from rotating i.e. preventing theft and the clamp covers the lug…

view full answer...

Answer 3

For your application I recommend checking out the Trimax Adjustable Wheel Lock #TMX65FR because it fits 10" to 18" wheels and is one of the most secure options we have to offer. The adjustments are made in 2 different places and not only…

view full answer...

Answer 4

The term, wet, in this case means that the head of the bolt has a grease Zerk in it and there is a channel that leads to center of the bolt. This makes it easy to grease the bolt while installed, as you can put a grease gun right up to the Zerk and…

view full answer...

Answer 5

The actual locking mechanism is the difference. The Trimax Heavy Duty #TMX42ZR has a much more robust hardened steel lock while the Trimax #TMX65FR uses a tube key style lock for the main lock.

view full answer...

Answer 6

Hey Matt, since you have a slight grade I would instead recommend the Trailer Valet 5X part #STC-V211 over the #ORJW1SU. The #ORJW1SU requires releasing tension in the crank that turns the wheel every time you go to crank the wheel further so I would…

view full answer...

Answer 7

Erickson does offer a zinc-plated steel backing plate for use with their E-Track products like their ATV E-Track Tie-Down Kit #EM09160. Use part #e96RR. You can see this item's hole dimensions and spacing in the linked photo. Since your trailer…

view full answer...

Answer 8

Yes, since your ST205/75 R14 tire has a width of 8" and the Trimax Trailer Wheel Chock and Lock #TMX75FR can fit up to 15" tires, this wheel chock will work just fine for you. Attached is a review video for you to check out if you have not…

view full answer...

Answer 9

Yes, the 5 on 4-1/2" bolt pattern in regards to trailer wheels is much more common therefore the selection of wheels will be much greater. The 5 on 5" bolt pattern has a slightly higher capacity but only marginally. I recommend the Dexstar…

view full answer...

Answer 10

For gooseneck trailers like yours where the coupler is not a standard that we have a lock for the best option is going to be a wheel lock like the etrailer part #288-02020, Barb. This will for sure fit as a lock and would be just as effective so it…

view full answer...

Answer 11

Hello Tyrone, thanks for reaching out. We do carry the Trimax locks, but I am sorry to say that we do not offer replacement keys for them. You may be able to contact the manufacturer directly to get new keys, or you might be able to have a locksmith…

view full answer...

Answer 12

The Replacement Anti-Wear Shoe Assembly part #3371303300 for 6" or part #3371303305 for 7" should fit the Fishers XV2 Snow Plow. However, you will need to confirm this by making sure the post diameter of 1.32" will work for you. I have…

view full answer...

Where is the etrailer Wheel Lock # 288-02020 Manufactured?

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching