Replacement Hub Cover, Part Number QH-2001F

Question

Question:

hello good afternoon I would like to know if you have some hubcaps for some alcoa wheels size 19.5 the only information I have about the other hubcaps part# was QH-2001F

asked by: Joaquin A

1

Helpful Expert Reply:

The part you need is the Phoenix USA Front Hub Cover w/ Pop Out - 10 on 225mm - ABS Plastic - Qty 1, part # PXQH2001F, you attached to your question.

I have included a video review link below.

expert reply by: Mark Smith

1

Answer 1

I looked up the wheel bolt pattern of your 2004 Ford F-550 and it has a 10 on 225 mm bolt pattern. So for the rear you'd want the #PXQH2001R and then for the front you'd want the #PXQH2001F.

view full answer...

Answer 2

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 3

Hey Jeff. There is definitely a correlation between weight and capacity. I've listed the weight of all three of the Power Mountain Tallboy Off-Road Bottle Jacks we have below: Power Mountain Tallboy Off-Road Bottle Jack - 7-15/16" to…

view full answer...

Answer 4

Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…

view full answer...

Answer 5

Hello Joe, Thank you for reaching out! The Power Mountain Tallboy Off-Road Bottle Jack - 11-5/16" to 27-1/16" Lift - 12 Tons #PM94FR does have the capacity you’d need, but since your fifth wheel’s frame sits about 25" off the ground,…

view full answer...

Answer 6

Good afternoon Ron, congrats on the new truck! Those are sweet. For your application with the 8 foot bed, OEM hitch, no running boards etc., you'll want the TorkLift Tie Downs - Custom Frame Mount - Front and Rear #TL87DR. They also come in…

view full answer...

Answer 7

Hey Duane, welcome back! The TorkLift SuperTruss Hitch Extension #TLE1532 has an overall length of 32". This is measured from the end of the SuperHitch receiver to end of SuperTruss receiver. What are you towing with your Silverado?

view full answer...

Replacement Hub Cover, Part Number QH-2001F

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching