Is an Installation Video Available for the Curt T-Connector Harness C56330 in a 2013 Dodge Journey  

Question:

Expert Reply:

We have not had a vehicle here to allow us to produce an installation video for this particular wiring harness, Curt # C56330, in the 2013 Dodge Journey. However, since this is a plug-in harness its installation will be quite similar to that of many other comparable products from Curt and other brands. Please note that this harness works only with vehicles that have LED-type tail lights. It will not work with vehicles that have incandescent lights.

Installation requires temporary removal of the two tail light assemblies. The plugs going into the light assemblies are removed and the T-connector plugs are installed between them and the lights. The white ground wire with ring terminal is to be secured to a clean metal surface behind the driver-side light. The converter box will mount behind the driver-side light using included double-sided tape. The only actual wiring to be done is to install a 12V fused power wire, which is included, as are the required connectors and zip ties to secure the wire to the frame. This wire connects to the short black wire at the converter box and the other end is to be run along the underside of the vehicle and up to the engine compartment to the positive terminal on the battery where the fuse holder will be installed. I have included a photo of this harness with the parts labelled as well as the manufacturer instructions, which include color photos.

expert reply by: Adam R

0

click to enlarge