Grease Cap for Dexter Axles With 2-3/8 Inch Outer Diameter
Updated 05/09/2022 | Published 05/07/2022
Products Featured in This Question
Question:
hi, i havr dexter axles with 2 3/8 od dust cap the new rim center cap is off by 1/4 ,looking for a lower profile dualst cap thNks
asked by: Peter G
Expert Reply:
The closest thing we have to a 2-3/8" outer diameter is the Grease Cap - 2.446" Outer Diameter - 1-5/16" Tall - Drive In # F001520. I recommend using a digital caliper like the # PTW80157 when measuring to ensure accuracy. If you find that it is in fact 2.375" then we do not have a grease cap available in that size. I'm not sure what you have now, but this has a crown height of 1.03" so you can compare to see if it is a lower profile.
Product Page this Question was Asked From
4" Carbon Fiber Digital Caliper
- Hand Tools
- Measuring and Layout Tools
- Digital Calipers
- Carbon Fiber
- Performance Tool
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Recommended Bearing Kit for a 3,500 lbs Axle on a Boat Trailer
- Q&A: How to Determine the Replacement Hubs for a 2002 Magic Tilt Trailer
- Q&A: Kodiac Disc Brake Kit Compatibility with UFP DB-42 Axle
- Q&A: Diameter of Spindle Washer # SW1000 and Wobble Roller Retainer Ring CE10981
- Q&A: How to Choose the Correct Size Trailer Winch For a Boat Trailer
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Q&A: Will Installing Trailer Hitch on 2020 Nissan Murano Keep Hands Free Liftgate From Working
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Troubleshooting Trailer Bearings that Fit Almost Too Tight to Install
- Article: Trailer Wiring Diagrams
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Lighting Requirements