MORryde StepAbove Steps For A 2007 Keystone Montana 2955RL

Question

Question:

mOR RYDE STEP mr68rr, I HAVE A 2007 kEYSTONE mONTANA 2955rl . MY DOORWAY WIDTH IS 291/2.. tHRESHOLD TO GROUND 30... I BELIEVE THIS STEP WILL WORK , BUT I HAVE A STEP UP AS TYOU GO INTO DOORWAY INTO CAMPER .. ITS ABOU 9 DEEP AND WIDTH OF DOORWAY. MY QUESTION IS HOW DEEP IS THIS STEP ASSEMBLY WHEN IT IS IN THE UPRIGHT POSITION , NOT SURE IF I CAN USE THIS TYPE OF STEP .

asked by: Leslie J

0

Expert Reply:

If I'm understanding you correctly, the MORryde StepAbove RV Steps # MR68RR is 8.3" deep when in the upright position.

Based off of the measurements you took of your 2007 Keystone Montana 2955RL, the MORryde StepAbove RV Steps # MR68RR should work great for you.

expert reply by: Bryce D

0

Rick E.

5/18/2024

Yes I'm in the same boat. 2010 Keystone Montana 2955RL 5th wheel. 28 1/4 width, 30" to ground, 9" deep before the step up.. Did the MR68RR work for the other customer and will these steps work for my application? Thanks

Bryce D.

5/20/2024

@RickE They never responded back so I don't know for sure, but I can say based off of the measurements given the MORryde StepAbove RV Steps for 27-3/4" to 30-1/4" Wide Doorway # MR68RR will work great for you.

Answer 1

Hey Rick, Yep, the 3-step MORryde StepAbove RV Steps #MR68RR will indeed work for your Keystone Montana. These steps are designed for 30" to 33-1/2" ground to threshold measurements and doorways that are are 27-3/4" to 30-1/4"…

view full answer...

Answer 2

Hey Brian, the correct MORryde Stepabove for your doorway width and height would be the part #MR85RR. This also has a strut assist that comes with it to make it a little easier to raise and lower as well. What kind of steps do you have now and what…

view full answer...

Answer 3

We have really great head units you can use to upgrade from your Furrion DV3300 but Furrion no longer uses the style of connector that the DV3300 came with so it wouldn't be a plug and play install. The part #DV1230BL is the upgraded successor to…

view full answer...

Answer 4

Hi John, that’s a great question and I’m really glad you’re checking this before installing. The Lend-a-Hand Mini part #SC25GR is designed to match the same mounting pattern as the standard Lend-a-Hand rails, like part #AM-800, which is a common…

view full answer...

Answer 5

Hey Don, thanks for reaching out. The MaxxAir MaxxFan Mini Roof Vent #MA00-04401M fits a 14" x 14" roof opening. This is standard across virtually all RV roof vents. What kind of trailer are you building this into?

view full answer...

Answer 6

The MORryde StepAbove entry steps install inside your camper's doorframe, measure between the door frame flanges to determine your doorway width. The doorway threshold will be used as the mounting point, measure from the mounting point to the…

view full answer...

Answer 7

I spoke with MORryde and they stated the item number you were given does not match anything they have. Possibly it's the item number that the RV shop uses instead of the manufacturer number? Based on your photos it appears to me that you have a…

view full answer...

Answer 8

If you have limited clearance inside the door our best option for fold down steps would be the MORryde Flip Tread RV Steps which require the least amount of clearance inside the trailer while folded up, you need 5-1/2 inches of clearance from inside…

view full answer...

Answer 9

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 10

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 11

You are right on. The 8" rise/drop on the MORryde StepAbove Fold-Down Steps #MR98RR is the height between the steps. The #MR48RR you were looking at has a 9" rise/drop meaning the distance between the steps is 9". The #MR98RR is…

view full answer...

Answer 12

Hello Theresa, Yes, the TorkLift GlowStep Revolution #TLA8002 will work on your 2022 Forest River Aurora 18BHS based on the measurements you provided. Your 24 inch ground clearance is right within the operating range for the 2-step #TLA8002, and the…

view full answer...

MORryde StepAbove Steps For A 2007 Keystone Montana 2955RL

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching