How Does Optronics STL101RCFB GloLight Ground to Trailer Frame
Published 04/10/2022
Products Featured in This Question
Question:
Hello! How exactly do these lights ground? Are they meant to mount to a metal frame and thats how, or is there a separate ground wire by chance or built into the pigtail connection? Im contemplating these for a wooden flatbed and would like to know what I would need to do or if you have others that ground by wire, not contact. Thank you!
asked by: David G
Expert Reply:
The # STL101RCFB Optronics GloLight would ground to the trailer frame via the 3 prong pigtail that's sold separately as # A47PB for a right angle plug or # A45PB for a straight plug. The white wire on the pigtail is the ground connection. The red wire carries the turn signal/brake lamp circuit and the black wire carries the running lamp circuit.
I've linked to some product videos that you might find helpful.
Product Page this Question was Asked From
GloLight LED Trailer Tail Light - Stop,Turn,Tail - Submersible - 21 Diodes - Round - Clear Lens
- Trailer Lights
- Tail Lights
- Brake/Tail/Turn
- Round
- Recessed Mount
- Submersible Lights
- LED Light
- 5-1/2 Inch Diameter
- Red
- Optronics
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Trailer Wiring Diagrams
- Q&A: Replacement LED Interior Light
- Article: How to Measure for Trailer Hitch Drop
- Q&A: 12 Inch Long Equalizer For 2 Inch Slipper Springs & 8,000 lb U-Bolts For Tandem Axle Trailer
- Q&A: Comparing Lippert Never-Fail Bushings to the Bronze Bushings and Wet Bolt Option for Tandem Axles
- Q&A: Slipper Spring Hanger Positioning for 7,000 lb Tandem Axle
- Q&A: Bolt Recommendations for a Equalizer for 2 inch Slipper Springs
- Q&A: Can Bulb be Replaced on Optronics Trailer Tail Light # ST45RB
- Q&A: Brightest 1157 LED Bulbs
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: Trailer Lighting Requirements