What is the Thickness and Center Hole Diameter of the Tail Light Bracket # CE26057G?
Updated 04/06/2022 | Published 04/05/2022
Question:
What is the diameter of the single round hole on this bracket? How thick is the metal used? Thanks
asked by: Lawrence W
1
Helpful Expert Reply:
I went ahead and pulled the # CE26057G from our warehouse and made those measurements for you. The large hole measures 3/4" in diameter and the thickness of the bracket is just over 1/16 of an inch.
I attached a diagram of these dimensions for your convenience.
expert reply by:
Bob C
1
CE Smith Replacement Tail Light # CE26057G Dimensions
(click to enlarge)
(click to enlarge)
Product Page this Question was Asked From
Replacement Tail Light Bracket for CE Smith Boat Trailer - Galvanized Steel - 4-1/2" Long
- Accessories and Parts
- Boat Trailer Parts
- Brackets
- Tail Light Bracket
- 2 Inch Hole Length
- Steel
- CE Smith
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Will The Peterson M540 Light Kit Fit A Bracket With 2-1/4" of Head Room?
- Article: Trailer Lighting Requirements
- Q&A: Taillight Bracket Recommendation for an Older Harbor Freight Trailer
- Q&A: Why Would 7-Way Adapter 20142 Only Work for a Few Hours
- Q&A: How to Activate Trailer 12V Power Feed on Factory 7-Way in 2016 Silverado
- Q&A: Will Optronics Trailer Taillight # STL008RB Fit Peterson Light Mounting Brackets
- Q&A: Load Resistor For Correcting LED Trailer Running Lights That Light Dim When Vehicle Is Turned Off
- Q&A: What Size Fitting Is Needed on RV Propane Hose That Goes from Regulator to Trailer
- Article: Trailer Wiring Diagrams
- Article: Hand Winches
- Article: Best Boat Trailer Jacks
- Article: Printable Trailer Bolt Hole Pattern Template
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Boat Trailer Guides: Which are the Best?