What is Steel Gauge of E-Track e42VR

Question

Question:

What gauge size of the material is used for the 8-foot E-track? Thanks

asked by: Russell H

0

Expert Reply:

E-track like the etrailer part # e42VR is made from 12 gauge steel which is 2.5 mm thick.

expert reply by: Jameson C

0

Answer 1

The capacity is 2,000 lbs per track for the etrailer Horizontal E-Track - Black Powder Coated Steel - 2,000 lbs - 94" Long #e42VR. The weight capacity is per track, so using two of them side-by-side will give you a 4,000 lb capacity. So yes it…

view full answer...

Answer 2

For you needs the etrailer Horizontal E-Track part #e42VR which include four 8' sections of Etrack which can be cut to suit your application and two of the Erickson E-Track Tie-Down Kit w/ 2 Ratchet Straps with Roller Idlers and 2 Wheel Chocks…

view full answer...

Answer 3

You will use metal screws to install the etrailer Horizontal E-Track #e42VR. You'll also need backing plates to install this e-track and the mounting hardware is actually included with the etrailer E-Track Backing Plates with Hardware #e76YR. The…

view full answer...

Answer 4

For 53' of E-Track I recommend getting 2 of the etrailer #e42VR for Black Powder Coated or #e62VR for Galvanized. These kits come with 4 sections that are 8' long and while 2 of these kits will give you about 64' of E-Track, it's much…

view full answer...

Answer 5

Hey Nate, We do not have a 3/4" spindle nut or washer, the smallest option is the 7/8" spindle nut #165931and a 1" washer #SW1000. I cannot find anything smaller. Are you sure the threads on you're spindle are 3/4"? If they…

view full answer...

Answer 6

Hey Jon, happy to help. Yes, I was able to find the replacement parts to #BM44YR. The 90 degree angle #BM99RR and the check valve #BM98GR have 1/2" MPT fitting that connect directly to your B&B RV Water Center. So no worries about…

view full answer...

Answer 7

Hey Gary, thanks for the information! The etrailer Horizontal E Track item #e85VR would be a great way to add additional anchor points. You can bolt these tracks directly to your trailer's deck using self-drilling metal screws like item #SL99FR.…

view full answer...

Answer 8

Since the slot dimensions and capacity of different brands of E-Track are identical, really the only differences are the finish and the lengths the tracks are sold in. If you're using the E-Track in an area where aesthetics are important, you can…

view full answer...

Answer 9

Hey Dave, thanks for reaching out! The Erickson Round D-Ring Tie-Down Anchor #EM59110 has a capacity of 1,200 lbs and is not going to be strong enough to cinch down your Polaris RZR securely. You need the CargoSmart Anti-Rattle D-Ring Tie-Down Anchor…

view full answer...

Answer 10

Hey Don, thanks for reaching out! I recommend using the etrailer E-Track Backing Plates w/ Hardware #e66RR to secure the etrailer Horizontal E Track #e25VR to your hardwood floor. If you were going to be putting the bolts through the floor and into…

view full answer...

What is Steel Gauge of E-Track e42VR

Product Page this Question was Asked From

Continue Researching