Replacement Doorknob For 1996 Jayco 1207 Pop Up Camper  

Hey Mark, I did some digging and was able to find your Decker 1042 door latch, and it looks like it has a 2 7/8" x 3 3/4" cutout. While we don't have a direct replacement, we do have the Bauer Products Camper Door Lock #BA54FR, which…

I recommend the Bauer Products Camper Door Lock - Black #BA54FR. I feel they are a good quality brand and easy to operate. You can get them keyed alike by using the drop down menu before you add them to your cart. This particular version requires a…

As long as the door on your Jayco pop up is between 1-3/8 and 1-5/8 inches thick and the center of the knob is 2-3/8 to 2-3/4 inches from the edge of the door the replacement door knob part #L32CS000 would fit and work well.

We do have replacement door knobs like part #L32CS000 which I have linked for you to filter through but without any pictures or knowledge of what style you have it is a little difficult to say if we have a replacement that matches up or not. If you…

Hey Kris, you'll want to measure the length from the very front to the very back of the fender as well as the overall width and height with height being the least important. For example, the part #HP52VR has the dimensions of 9" Wide x…

The B&W Continuum #BW78FR and the Reese Strait-Line #RP66083 are both great systems. The B&W Continuum is going to be easier to set up, but as far as sway control goes, I definitely have to give the edge to the Reese Strait-Line. The…

To select the correct B&W Continuum Weight Distribution System for your needs you will first need to determine if you have a standard coupler(mounts on top of trailer frame rails) or an underslung coupler(mounts on the bottom of the trailer frame…

The B&W Continuum Weight Distribution System part #BW78FR requires at least 24" of space on the frame directly behind the coupler and along the side a few inches back from there. This works with most trailers but for some it will not and,…

To be completely honest the sway control feature of the B and W Continuum part #BW78FR isn't nearly as advanced as the rest of the system. The advertised sway control of this system is in the head of the system between where the ball and the…

An underslung trailer coupler is one that attaches to the bottom of the trailer frame and an overslung one is one that attaches to the top of the frame. The Replacement Head for Blue Ox SwayPro Weight Distribution Systems part #BXW4011 is for…

The difference between the standard and underslung B&W Continuum Weight Distribution System is the coupler style they are designed for. If you have a standard coupler like the #CA-5400-B mounted to the top of your frame then you need the standard…