Can the 2022 Honda Ridgeline Use the Tekonsha Prodigy P3 Brake Controller

Question

Question:

2022 Honda Ridgeline with tow package. You do not list tekonsha 90195 trailer brake controller as one that is compatible with this vehicle. Why? You mention in an answer to a question for the 2021 this would be a good choice. What controller do you recommend? I see several experts recommend the tekonsha . Thanks

asked by: David

1

Helpful Expert Reply:

You can certainly use the Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional # 90195 on your 2022 Honda Ridgeline. It was not yet confirmed that the custom wiring harness fit the 2022 which is why you didn't see it listed. You will, however, be able to use the # 3070-P wiring harness to install this on your vehicle.

The Tekonsha P3 is a great option and is very reliable and popular. It is a proportional controller with 5 storable settings. It has an easy to read display and uses integrated safeguards to protect your vehicle, trailer, and the controller. I would definitely recommend this brake controller.

I have attached an installation video for your reference.

expert reply by: Robin H

1

Answer 1

Hey Jason! I do have a solution, but Tekonsha is for sale right now and most of their parts are not available. This includes the custom wiring harness for your 2020 Honda Ridgeline. What you can use is the Curt Custom Wiring Adapter for Trailer Brake…

view full answer...

Answer 2

The Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers #3070-P has been confirmed by Tekonsha to fit your 2022 Honda Ridgeline. This will allow you to install the Tekonsha Prodigy P3 Trailer Brake Controller #90195 as a plug and play…

view full answer...

Answer 3

For a trailer brake controller, I recommend the Tekonsha Prodigy P3 Trailer Brake Controller, #90195 with the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers, #3070-P which is completely plug-in-play. The Tekonsha P3, #90195 is the…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

To install a Redarc Tow Pro Liberty in your 2023 Toyota Tacoma Sport you will need the following parts: Redarc Tow-Pro Liberty Brake Controller item #RED24FR Plug-and-Play Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers item #RED99FR…

view full answer...

Answer 7

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 8

That's a very good question, we tend to be extra cautious and say to use 10 gauge wire because that would be more than enough. When you get into longer trailers that will end up using a lot of wire the heavier gauge wire becomes more necessary.…

view full answer...

Can the 2022 Honda Ridgeline Use the Tekonsha Prodigy P3 Brake Controller

Featured Help Information

Miscellaneous Media