Availability of a Replacement Remote for a Fan-Tastic Vent Model 6600 with 417RF Remote  

On the install sheet that I see in your picture there is programming instructions. But in case you didn't see them what you need to do is hold your remote 12 inches away from the fan while holding both arrows. The Auto and Manual lights…

If your older remote looks like what is in the picture I attached the part #FV9068-81 would work as a replacement according to Fan-Tastic Vents but you will need to program it. To program hold your remote 12 inches away from the fan while holding…

I spoke with my contact at Fan-Tastic Vent regarding your model 6600 vent with the 417RF remote. She did confirm that the current model remote #FV9068-81 will not work with your vent model. The original remote for your vent is no longer available.…

Fantastic Vent did update the remote control component of their vents back in January of 2014 so older units like yours cannot use the current replacement remote #FV9068-81. The upgraded vent model to replace yours is part #FV807350 which has a 12V…

I have attached for you below a list of troubleshooting steps for the Fan-Tastic Vent Roof Vents like part #FV807350 which will vary depending on what symptoms your roof vent is having and what particular model you have. The remote reprogramming…

If the remote on your Fan-Tastic Fan #FV807350 is no longer working you can replace it with Fan-Tastic #FV9068-81 remote control. However I would try these troubleshooting steps first. 1. Ensure that you have good batteries in the remote. 2. Verify…

After speaking with Fan-Tastic Vent, the original remote for your 6600 vent is no longer available. The #FV9068-81 Replacement Digital Remote Control you have is not compatible with your current vent fan model, that is why it will not sync up. If you…

To program the Replacement Digital Remote Control for Fan-Tastic Vent Roof Vent with 12V Fan #FV9068-09 for your: -Fan-Tastic Vent Roof Vent w/ 12V Fan and Remote #FV807350, you will need to try and hold either the two arrows for the temperature, or…

In order to then enable the rain sensor on the Digital Remote Control #FV9068-09 you need to hold the up/down arrow on the remote for three seconds until you see the light illuminated under the "Rain Sensor Off" label disappear. Please note…

The Replacement Digital Remote Control for Fan-Tastic Vent Roof Vent with 12V Fan #FV9068-09 is the replacement remote for the Fan-Tastic Vent Roof Vent w/ 12V Fan and Remote - Powered Lift - 14-1/4" x 14-1/4" #FV807350. If that is the unit…

For programming a Fan-Tastic roof vent remote like part #FV9068-09 what you need to do is hold your remote 12 inches away from the fan while holding both arrows. The Auto and Manual lights will begin flashing immediately. Continue holding both arrows…