Trailer Hitch Recommendation for 2010 Ford E-350 Van

Question

Question:

I have a 2010 E 350 ford van. towing 6300 lb trailerloaded 7100lbs. tongue weight 700 t0 900 lbs which trailer hitch receiver is required/ recommended? thank you

asked by: Fred A

1

Helpful Expert Reply:

I'd recommend going with the Curt Class V hitch part # 14055 that fits your 2010 Ford E-350 as it has way more capacity than you'd ever need, is made in the USA, and installs easily.

expert reply by: Jameson C

1

Answer 1

As long as your rear bumper looks the same as the one I have attached a photo of, the Draw-Tite Ultra Frame Trailer Hitch Receiver part #41945 will fit and work well for your 2011 Ford E-350. This is a Class V hitch with a 2" receiver tube…

view full answer...

Answer 2

If the bolt holes on the frame of your 2010 Ford E-450 RV are 38-5/8 inches apart from left to right the #14055 can fit but the hitch you referenced has not been confirmed as a fit so I would not recommend it.

view full answer...

Answer 3

The distance between the mounting holes from side to side on the Draw Tite trailer hitch part #41945 are 38-1/2 inches. This hitch fits the following vehicles: 2004 - 2014 Ford Van E-150 2004 - 2014 Ford Van E-250 2004 - 2014 Ford Van E-350 2000 -…

view full answer...

Answer 4

The Curt #14055 will actually sit just about flush with the edge of the bumper once installed on your 2006 Ford E-350. Though this will meet the weight capacities you need, if you are looking for something to completely clear the bumper, it will fall…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 8

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 9

Hey Adrian! The higher capacity for the B&W #BW47BR and Curt #C77MJ comes from the construction. The B&W hitch weighs 45 lbs and then the Curt and Trailer Mate #TMT54FR both weigh 32 lbs. The Trailer Mate does sit just a tad higher compared…

view full answer...

Answer 10

Though the Curt # C13409 and Draw-Tite #76271 are nearly identical to each other, there are a few subtle differences. First being where they sit once installed. The will both have the exact same height of 14-1/2 inches, but the Draw-Tite #76271 will…

view full answer...

Answer 11

It sure is Rob, and congrats on the new SUV. The Oris Trailer Hitch with Detachable Hitch Receiver item #TS76VR is definitely comparable to the Stealth Hitches item #SH87FR. It's got the same kind of removable receiver that works great with a…

view full answer...

Answer 12

Hey David, thanks for reaching out. Yes, the Curt Trailer Hitch Receiver #C82RJ will indeed fit the 2027 Kia Telluride. This hitch is still in the pre-order phase, but it is being going to fit both the 2026 and 2027 Telluride. Right now, we are…

view full answer...

Trailer Hitch Recommendation for 2010 Ford E-350 Van

Products Featured in This Question

Continue Researching