Is Americana Valve Stem part # AM20906 Sold Individually

Question

Question:

For $, do you get 1 valve stem or a set of 4?

asked by: Mark H

0

Expert Reply:

The Americana Valve Stem part # AM20906 is sold individually. If you needed 4 total you'd need to order a quantity of 4.

expert reply by: Jameson C

0

Answer 1

All of the trailer tires we carry are rated for 65 miles per hour which is suitable for highway speeds. A 4.8-12 trailer tire, like the Kenda K353 Bias Trailer Tire, #AM10062, is rated for 90 psi. You should always inflate a trailer tire to the max…

view full answer...

Answer 2

The valve stem that comes with the Kenda 4.80/4.00-8 Bias Trailer Tire with 8" White Wheel part #AM30060 is rated for the max psi range of the tire which is 90 psi therefore you won't have any issues. If you feel more conformable with a…

view full answer...

Answer 3

Measure the diameter of the hole the the valve stem is coming through in the picture you submitted. With that you'll be able to find which valve stem you need. The two common sizes are .453 and .625 inch which the part #AM20906 is a confirmed fit…

view full answer...

Answer 4

The Provider ST215/75R14 Radial Trailer Tire - Load Range D #TTWTRTM2157514D you were looking at is a great choice to replace the tires on your boat trailer as the increased load capacity of 2200lbs at 65 PSI will keep the tire running cooler and…

view full answer...

Answer 5

In almost all cases the limiting factor for tire pressure on a wheel setup is the valve stem. If you upgrade the valve stem in your wheels to ones that can handle 110 psi like what the part #AM10501 calls for you'd be fine. Usually valve stems…

view full answer...

Answer 6

The only time that a metal valve stem like part #AM20906 is required is when the psi rating meets or exceeds 100 psi. If you plan on using the Kenda 205/65-10 Bias Trailer Tire with 10" Galvanized Wheel #AM3H490 then you don't have to change…

view full answer...

Answer 7

A higher load range tire has a higher ply rating but it will also produce a rougher ride and could have a psi rating that exceeds the capacity of the wheel or, more likely, the valve stem. The size you have now, 225/75-15 load range C, is rated for…

view full answer...

Answer 8

The limiting factor in a wheel's pressure capacity is usually the valve stem. Some are rated only for 65-psi, #AM20903, while others such as #AM20904 are rated for 80-psi. Part #AM20907 handles up to 100-psi and part #AM20906 is good for tires…

view full answer...

Answer 9

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 10

A ST225/75R15 trailer tire will fit the Americana Aluminum Hi-Spec Series 6 Trailer Wheel #AM20455. The highest load range tire we offer in that size is the part #AM10303 which has a weight capacity of 2,830 lbs at 80 psi. For a set of valve stems…

view full answer...

Answer 11

Our combinations come from the manufacturer mounted and balanced as far as trailer tires need to be. We don't have the equipment in house to mount the tires to the wheels. We recommend going to a local shop to have them mounted. Make sure you get…

view full answer...

Answer 12

For a boat trailer, the best finish is going to be galvanized. The Kenda 5.70-8 Bias Trailer Tire with 8" White Wheel - 4 on 4 - Load Range C #AM30120 that you were looking at may work fine, but I don't recommend it for boat trailers since…

view full answer...

Is Americana Valve Stem part # AM20906 Sold Individually

Product Page this Question was Asked From

Continue Researching