Parts Required to Install Redarc Tow-Pro Elite Trailer Brake Controller on 2019 Thor Four Winds 31W

Published 01/19/2022

Products Featured in This Question

Redarc Tow-Pro Elite Brake Controller - Dash Knob - Off-Road Mode - Up to 3 Axles - Proportional

(1676)

$290.00

Deka Heat Shrink Butt Connector - 12-10 Gauge - Nylon Insulation - Yellow - Qty 10

(1104)

$13.80

Question:

Looking to purchase Redarc brake controller. We have a 2019 Thor Four Winds 31W/Ford E450.with factory tow pkg. Can you advise what we need to install? Thanks

asked by: David L

Expert Reply:

The only part you will need to install the Redarc Tow-Pro Elite Trailer Brake Controller # RED44FR is the brake controller itself. Unfortunately there is no wiring adapter for your vehicle, but that does not mean you can't use this brake controller.

Since you have the factory tow package you should have the factory tow port. You will need to splice the wires from the # RED44FR into the wires running to the tow port for installation. I recommend using butt connectors like the # DW05745-10 to make your connections.

I have attached an installation video on a Ford Ranger so you can see what the process is like.

expert reply by: Robin H