Availability of Replacement Cap for Titan Brake Actuator

Updated 01/18/2022 | Published 01/17/2022

Question:

I bought a trailer and the surge brakes do not work . I went to take the cap off and it split . Cap threads are 1 1/2 and only label I can find is titan 2 5/16 sae .4 I’m looking for the cap Thanks

asked by: Tony

Expert Reply:

As far as appearance goes that most closely resembles the Replacement Master Cylinder Filler Cap for Titan Model 60 Actuators # T4480701. In order to make sure this fits I recommend taking some measurements.

The # T4480701 has an overall width of 1-1/2" and the diameter at the threads is 1-1/4". The overall height is 1" with the height of the threads measuring 3/8". As long as the threaded part has the same measurements it should fit your actuator. See the diagrams below showing these measurements.

expert reply by: Robin H