What Spindle Fits the Dexter Trailer Idler Hub # 8-231-9UC1-EZ?
Updated 01/13/2022 | Published 01/12/2022
Products Featured in This Question
Question:
Looking for spindle to go with this hub . For a torsion axle . Believed to be tiedown . Has a taper that goes into axle and held in by 1” nut The taper starts at 2.3” and tapers to 2” and then 1” for nut
asked by: Don
Expert Reply:
The correct spindle that fits the Dexter Trailer Idler Hub Assembly for 5,200-lb to 7,000-lb E-Z Lube Axles - 8 on 6-1/2 # 8-231-9UC1-EZ is the #42 Spindle for 5,200-lb to 7,000-lb Trailer Axles - 2-1/4" Diameter # TRU57FR. We also have the #42 spindle that comes with a brake flange if you need it. That is the #42 E-Z Lube Spindle w/ Flange for 5.2K to 7K Trailer Axles - 2-1/4" Diameter # TRU37FR.
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 5,200-lb to 7,000-lb E-Z Lube Axles - 8 on 6-1/2
- Trailer Hubs and Drums
- Idler Hub
- EZ Lube
- 25580 / 14125A
- Standard Grade
- For 5200 lbs Axles
- For 6000 lbs Axles
- For 7000 lbs Axles
- 1/2 Inch Stud
- 8 on 6-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Electric Over Hydualic Disc Brake Setup for 2020 Grand Design Momentum 376THS
- Q&A: Idler Hubs and DeeMax Slip On Disc Brake Kit for 2019 Big Country 3360ss
- Article: Adding Electric Over Hydraulic Disc Brakes
- Article: Trailer Lighting Requirements
- Q&A: Replacement For 12 x 2 Dexter Electric Trailer Brakes
- Q&A: Replacement Brake Shoes for Dexter Axle 023-181 Brake Assembly
- Q&A: Parts Needed to Install Disc Brakes on a Trailer with Drum Brakes
- Q&A: Pilot Diameter for etrailer Hubs # AKIHUB-655-6-K and # AKIHUB-865-7-2-K
- Q&A: How Much Pressure Does an Electric Over Hydraulic Trailer Brake Actuator Put Out
- Article: Slipper Spring Trailer Suspension System Review
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Trailer Wiring Diagrams
- Article: How to Measure Your Trailer Wheel Bolt Pattern