Storage Cover for Eagle 1200 Camper Shell

Question

Question:

Hello for eagle cap triple slide truck camper with passenger rear side door what do you have for covers? Eagle cap 1200. Thank you

asked by: Ken

0

Expert Reply:

I looked up the length of your Eagle 1200 cap and found it measures 21 foot 3 inch so for a cover the Adco SFS part # 290-12263 would work great.

expert reply by: Jameson C

0

Answer 1

The o-rings part of the TorkLift AnchorGuard Derringer Turnbuckles for Truck Camper Tie-Downs #TLS9020 are not available individually, unfortunately. I recommend taking one of the o-rings needed for your turnbuckles to your local hardware store and…

view full answer...

Answer 2

Hey Luke, unfortunately the HappiJac Original Turnbuckles #LC182898 are not sold with just the 4 rear turnbuckles. You'd have to buy two of the Replacement Rear Turnbuckle for HappiJac Original Turnbuckle Set #LC182900.

view full answer...

Answer 3

Did you try the longer rear hooks in the front position of the #LC182895? If those were long enough they are available separately with #LC182896.

view full answer...

Answer 4

The Replacement Front Turnbuckle for HappiJac Original Turnbuckle part #LC182901 is for a single front turnbuckle. If you need a single rear turnbuckle then you'll use the Replacement Rear Turnbuckle for HappiJac Original Turnbuckle part…

view full answer...

Answer 5

The HappiJac Direct-to-Frame Truck-Mounted Camper Tie-Downs like part #LC182860 will work best with the HappiJac Original Turnbuckles for Camper Tie-Downs part #LC182898 when you replace the front turnbuckle j-hooks with the Replacement Threaded Hook…

view full answer...

Answer 6

I have a solution for you but the TorkLift AnchorGuard Derringer Turnbuckles item #TLS9020 are not sold individually. You will want to use the Replacement Rear Turnbuckle for HappiJac Qwik-Load Turnbuckle Set item #LC182896 to replace your lost rear…

view full answer...

Answer 7

Yes we have the Happijac Qwik Load Turnbuckles available as individual replacement parts with part #LC182896 for a rear one or part #LC182897 for a front.

view full answer...

Answer 8

Hey Christoph, you can use the HappiJac turnbuckle part #LC182896 with your Torklift tie downs. We had a customer with this type of setup report back that it worked well for them. This has a reach range of 22-1/2 inch to 35-1/2 inches so you might…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 12

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Storage Cover for Eagle 1200 Camper Shell

Product Page this Question was Asked From

Continue Researching