Correct Class III Trailer Hitch for a 1989 GMC K1500 Regular Cab

Question

Question:

what is the proper Class III for this truck, with no drilling? Current hitch rusted out at frame attachment. Thanks.

asked by: Chris C

0

Expert Reply:

The trailer hitch I recommend for a 1989 GMC K1500 Regular Cab is the Curt Trailer Hitch Receiver part # C13042. This trailer hitch has a class III rating and does not require any drilling for installation. It works on both step and fleet side models.

expert reply by: Conner L

0

Class III Hitch for 1989 Chevy K1500 Regular Cab
(click to enlarge)

Answer 1

The main difference between Draw-Tite trailer hitches #75033 and #75099 is the placement of the receiver tube on the cross member. On 75033 the receiver is attached to the rear part of the cross member. On 75099 it is welded below the cross member so…

view full answer...

Answer 2

I have another option but the Curt Trailer Hitch Receiver #13942 will not fit on your 1992 Chevrolet CK 1500 if you do not have a roll pan. This is due to the fact that the roll pan hitches sit higher up and require a cut out in the roll pan for the…

view full answer...

Answer 3

The Curt hitch part #C13082 that you referenced is a fit for your 1990 Chevy Silverado 1500 short bed that has a step bumper. You would also be able to keep your spare tire as well. At worst you might have to reposition it as you raise and lower the…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

The Draw Tite Class III hitch part #75033 that you referenced does fit your 1989 Chevy K1500 with the 37 inch frame dimension and step bumper.

view full answer...

Answer 6

I do have a great option for you, however I checked with Curt and it doesn't look like the Multi-Fit Class III Trailer Hitch #C13902 will fit without some significant modifications on your older 1995 Chevy C1500. As long as you have the factory…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 10

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 11

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 12

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Correct Class III Trailer Hitch for a 1989 GMC K1500 Regular Cab

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching