What is the Spacing on the mounting Holes for Trailer Fender PF775X21W
Updated 06/27/2013 | Published 06/26/2013
Products Featured in This Question
Question:
What are the measurements center to center on the mounting holes.
asked by: Jim
0
Expert Reply:
I went out to the warehouse and pulled trailer fender # PF775X21W. The holes on the top are 3-9/16 inches apart on center. The holes are 3/8 to 7/16 inches wide (there is a little room for tolerances since the plastic can expand and contract a little). You can use mounting brackets # PF775-BKT-2 to mount the fender.
expert reply by:
Michael H
0
Product Page this Question was Asked From
Single Axle Trailer Fender - White Plastic - 8" to 12" Wheels - Qty 1
- Trailer Fenders
- No Step
- 10 Inch Wheels
- 12 Inch Wheels
- 8 Inch Wheels
- 7-3/4 Inch Wide
- 20 Inch Long
- Plastic
- Bolt-On
- For Single-Axle Trailers
- White
- Redline
more information >
Continue Researching
- Q&A: What is the Lengthwise Spacing of the Mounting Holes for Trailer Fender # PF775X21W
- Q&A: Highest Speed Rating for a 4.80 x 12 Trailer Tire
- Q&A: Schematic Diagram for Stromberg Carlson Lead Jack Repair Kit LG-146059
- Q&A: Recommended Brackets to Mount Fulton Trailer Fenders # F008551
- Q&A: 4 Foot Long Ratchet Tie Down Strap for Boat Trailer
- Q&A: Do I Need 2' Straps or 4' Straps for My Boat Trailer Tie-Downs that are 33" Apart?
- Q&A: Replacement Upright for CE Smith Guide-Ons
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Trailer Wiring Diagrams
- Article: Trailer Lighting Requirements
- Article: Dealer Spotlight - Taps Truck and Auto Accessories
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: 7 Common Questions Everyone Has About Trailer Tires