How Far Apart Are Mounting Holes For Erickson Horizontal E-Track EM19147

Updated 11/11/2021 | Published 11/10/2021

Products Featured in This Question

Erickson E-Track Wheel Tie-Down Strap with Roller Idler and Ratchet - 2" x 12' - 1,100 lbs

(126)

$37.29

Erickson E-Chock Wheel Chock for E Track - Powder Coated Steel - Qty 1

(628)

$27.80

Erickson Horizontal E Track - Zinc Plated Steel - 2,000 lbs - 4' Long - Qty 1

(1208)

$30.48

Question:

Hi, I am going to purchase the e-chock and e-rail. I will be mounting the rails to my flatbed trailer with 2 thick wooden planks. What size of screws do you recommend I use to mount the e-rails? How far apart do you recommend I place the screws? Do you sell the screws and washers?

asked by: Robert M

Helpful Expert Reply:

The mounting holes are 2 inches apart, and to ensure its full capacity we do recommend screws in every mounting hole for the Erickson Horizontal E-Track # EM19147.

While we do not have the mounting hardware, the mounting holes are 1/4" diameter, so that's the size you'd want, with the correct length depending on how thick your wooden planks are; just be sure to get wood screws which I'm sure you knew but I just wanted to be thorough for you.

This will work great with the Erickson E-Chock Wheel Chock # EM09162 and if you also need a tie-down I recommend the Erickson E-Track Wheel Tie-Down Strap with Roller Idler and Ratchet # EM58523.

expert reply by: Kyle S