1970'S Coleman Versa Trailer Replacement Axle Due to Obsolete Hub and Spindle
Updated 11/08/2021 | Published 11/07/2021 >
Products Featured in This Question
Question:
Hi.. Im looking for 1970s Colemen Versa Trailer Wheel HUBs, No one can get the old wheels off. the wheel bearing part numbers are: L44649R and LM11949. Appears to be a 1.06 in by 0.75 in tapered spindle. Do you have anything that might fit? If so will also be needing wheels/tires. Thanks
asked by: Greg
Expert Reply:
My recommendation for your 1970's Coleman Versa Trailer is to change the axle as your hubs and spindles are going to be obsolete. As there is very little information that I can find on your axle under your Versa I will need you to provide the measurements for both the spring center to spring center and hub face to hub face that you have on your axle. This will help me to ensure that we have a replacement axle that will fit your Trailer.
We do have a more universal option that would use the Timbren Axle-Less Trailer Suspension System # A12RS440 to replace your current leaf sprung axle. The Timbren system comes with the correct hubs that will fit the Kenda 4.80/4.00-8 Bias Trailer Tire with 8" White Wheel # AM30000 that matches the size wheels and tires that came on your Versa.
Product Page this Question was Asked From
Replacement Trailer Wheel Bearing - L44649 - Qty 1
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.06 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Timbren Axle-Less Trailer Suspension w/ Idler Hubs - Standard Duty - No Drop - 4 on 4 - 1,200 lbs
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Most Popular Wheel Bearings
- Q&A: Replacement Hubs and Brakes for KZ Escape Free With 3,500 lb Axles
- Q&A: Replacement Hub and Drum for Dexter 2,800-lb Dexter Trailer Axles
- Q&A: What Race Corresponds with Bearing Number L68149 in Timken Kit # TMK52VR
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: Replacement Disc Brakes for 2006 McClain (MCCL) Boat Trailer
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Trailer Wiring Diagrams
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: Why Is My Thetford Aqua-Magic Style Plus Toilet Leaking After Replacing the Seals?
- Q&A: Recommended Idler Hub Kit w/a 5 on 4-1/2" Lug Nut Pattern for 2,200 lbs Axles
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision



