Replacing a Greystone Microwave Oven P90D23AP - X3 - FR03 From Its Cabinet Enclosure

Updated 10/23/2021 | Published 10/22/2021

Question:

I have a Greystone Microwave Oven model number P90D23AP - X3 - FR03. In my RV. I need to replace it with another one. How do you take the old one out and put the new one in? Your help would be appreciated.

asked by: Mike H

Expert Reply:

Your Greystone Standard RV Microwave w/ Trim Kit # 324-000105 is going to be likely only held in place by the front trim panel and the 4 screws that attach it to the front of the cabinet. Depending on your cabinet opening and the manufacturer of the RV once you have removed these screws you will either be able to just slide out the microwave from its shelf or you may have to lift the unit off its base if they included risers in the cabinet to get the microwave to the desired height. Once you have the microwave pulled out you should be able to access the plug and remove the entire assembly from the cabinet.

Installation will be the reverse of removal.

expert reply by: Bud M