Determining Which MORryde CRE 3000 Equalizers and Wet Bolt Kit Fit 2020 Grand Design Reflection
Published 10/07/2021
Products Featured in This Question
Question:
I’m going to upgrade my suspension on my 2020 Grand Design Reflection 5th wheel 337 RLS. I’m go to order MR27ZR 3000 CRE and MR46ZR wet bolt kit. My 5th wheel weight is 14,000 fully loaded. Am I ordering the correct parts.
asked by: George
Helpful Expert Reply:
It is possible that the MORryde Shocking Absorbing Equalizers # MR27ZR and Wet Bolt Kit # MR46ZR you were looking at will fit your 2020 Grand Design Reflection 337RLS, but the only way to be sure will be measuring what is currently installed on your trailer.
The # MR27ZR measure 8" center to center of the horizontal mounting holes, so you will want to take this same measurement on your current equalizers to see if this matches.
Moving on to the # MR46ZR, this kit includes shackle straps that measure 2-1/4" center to center of the two horizontal mounting holes so you will need to measure your current shackles to make sure this matches.
As long as the measurements match this will work perfectly for you.
If you find that your equalizers and or shackle straps are a different length just let me know.
I included videos of the products mentioned for you to take a look at.
(click to enlarge)
(click to enlarge)
Product Page this Question was Asked From
MORryde Shock Absorbing Suspension Equalizers for Tandem Axle Trailers w/ 35" Wheelbase - 8K
- Trailer Suspension Parts
- Equalizer Upgrade Kit
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- 8 Inch Long
- Tandem Axle
- MORryde
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Search Results: lippert suspension
- Search Results: morryde x~factor
- Search Results: morryde suspension upgrade kit for tandem axle trailers
- Shop: MORryde Shock Absorbing Suspension Equalizers for Tandem Axle Trailers w/ 35" Wheelbase - 8K
- Shop: 4-Leaf Double-Eye Spring for 4,000-lb Trailer Axles - 26" Long
- Shop: MORryde X-Factor Crossmember for Standard Frame Hangers
- Shop: MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 3-1/8" Long Shackle Straps
- Shop: CE Smith U-Bolt Kit for Mounting 3,500-lb, Round Trailer Axles - 5-1/2" Long U-Bolts - Zinc
- Search Results: morryde suspension kits
- Search Results: dexter 3500 lb axle
- Search Results: spare tire mount
- Video: All About the CE Smith U-Bolt Kit for Mounting 3,500-lb, Round Trailer Axles
- Video: Let’s Check Out the CE Smith U-Bolt Kit for Mounting Round Trailer Axles
- Q&A: Can 26 inch Long Leaf Spring be Replaced with 25-1/4 inch
- Q&A: Difference Between 3 and 4 Leaf Spring Stack for 3,500 Pound Axle
- Search Results: trailer leaf springs
- Shop: 4-Leaf Double-Eye Spring for 3,500-lb Trailer Axles - 25-1/4" Long
- Shop: MORryde Suspension Upgrade Kit for Tandem Axle Trailers w Correct Track - 3-1/8" Shackle Straps
- Video: Review of the Replacement Wet Shoulder Bolt
- Video: MORryde X-Factor Crossmember Adapter Kit for Drop Down Applications Review
- Q&A: Where Do the MORryde X-Factor Crossmembers Install
- Q&A: Can 3500 lb Leaf Springs Be Upgraded to Heavier Duty for a 2020 Grand Design Imagine 2400BH
- Q&A: Cushioned Equalizer Kit that Fits 2022 Grand Design Imagine 2600RB
- Q&A: Does Furrion Vision S+ Have to Use Included Power Cable for Monitor
- Video: MORryde Tandem Axle Trailer Rubber Equalizers Installation - 2009 Keystone Montana Mountaineer Fifth
- Q&A: Best Shock Absorbing Suspension Equalizers
- Video: An In-Depth Look at the Heavy Duty Grease Gun
- Video: MORryde Standard Frame Hanger X-Factor Crossmember Installation - 2022 Grand Design Imagine Travel T