Curt 2 To 3 Wire Tail Light Converter Install

Published 10/01/2021

Question:

I just purchased C56196. I saw a picture on how to hook up this product from an etrailer answer. I was wondering if I can get a pic of installation instructions.

asked by: Scott C

Expert Reply:

Yes, I will attach a snip of the installation as well as post it here.

1. Use the double-sided tape on the
converter to secure it at the rear of the
TOWING vehicle.
2. Connect Yellow Wire (Input) to TOWING
vehicle’s Left Turn/Brake Wire.
3. Connect Green Wire (Input) to TOWING
vehicle’s Right Turn/Brake Wire.
4. Connect Yellow Wire (Output) to TOWED
vehicle’s Left Turn Wire.
5. Connect Green Wire (Output) to TOWED
vehicle’s Right Turn Wire.
6. Connect Red Wire (Output) to TOWED
vehicle’s Brake Wire.
7. Connect White Wire (Ground) to the chassis
of the TOWING vehicle. (TOWED vehicle
connection must include ground.)

Also the instructions will be linked to the product page.